2000 Intrepid 2.7 timing chain - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 1 (permalink) Old 11-02-2005, 12:50 PM Thread Starter
Intrepid Newbie
 
Join Date: Nov 2005
Posts: 3
Feedback: 0 / 0%
 
2000 Intrepid 2.7 timing chain

OK, so I get this 2000 Intrepid with a dead 2.7, pull the heads and all the intake valves are bent. I put the heads from another 2.7 with a blown rod on, buy a new timing chain, but when I try to line up the colored links with the crank/cam gears, I find out that there are two colored links right next to each other on the drivers side cam gear. So, I pick one of the colored links to line up with the marks on the cam gear, and now it won't start. It fires now and then but won't keep running. Is there another way to line up the timing chain so the valves open at the right time? Is there a way to check to see if the timing chain is lined up like it should be? Also, both engines were filled with what appeared to be burnt oil, not sludge, and the timing chain tensioner was stuck which I think caused the timing chain to skip and bend the valves. Both engines had the same burnt oil deposits everywhere and it seems to me that somewhere the aluminum block/heads are overheating the oil until it becomes hard and crumbly and blocks the oil passages. A lot of them are blowing up, they can't all be from poor maintenance. THANKS!
route89 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome