Just to Clarify Install Traction Control - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 11 (permalink) Old 09-25-2012, 10:12 AM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Just to Clarify Install Traction Control

After looking at threads I Just want to clarify

I have ABS already on my car, to install Traction Control I would just need

1- Off button in dash (Installed already)
2- Cluster that has Traction control (got one from 300 already installed)
3- Connect button to cluster (done)
4- Traction control module (getting one)

Once all these are installed in theory I would have Trac control?
Intrepticon is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 09-25-2012, 11:25 AM
I hit shit with sticks!


 
Daytrepper's Avatar
 
Join Date: Jan 2005
Location: Zebulon, NC
Posts: 34,294
Feedback: 20 / 100%
                     
Garage
You may need the dash harness and front fuse box and harness if the plugs, fuse holders, and wiring are not there already for the traction control. I had to add those when I did this mod.

Last edited by Daytrepper; 09-25-2012 at 11:38 AM.
Daytrepper is offline  
post #3 of 11 (permalink) Old 09-25-2012, 03:03 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
what plug at the junction box would you have had to install? The only thing I had to run was the switch on dash to Blue Plug behind cluster Pin 8 and the other wire to ground.
According to FSM 8W-40-3 I have all the wiring. Are you talking about under the hood? Cause even there I have all the wiring... 2 fuses in the PDC and one in the JB & the PCI Bus to the BCM then to cluster..

Last edited by Intrepticon; 09-25-2012 at 03:07 PM.
Intrepticon is offline  
post #4 of 11 (permalink) Old 09-25-2012, 04:15 PM
I hit shit with sticks!


 
Daytrepper's Avatar
 
Join Date: Jan 2005
Location: Zebulon, NC
Posts: 34,294
Feedback: 20 / 100%
                     
Garage
Quote:
Originally Posted by wishihadacharger View Post
what plug at the junction box would you have had to install? The only thing I had to run was the switch on dash to Blue Plug behind cluster Pin 8 and the other wire to ground.
According to FSM 8W-40-3 I have all the wiring. Are you talking about under the hood? Cause even there I have all the wiring... 2 fuses in the PDC and one in the JB & the PCI Bus to the BCM then to cluster..
I had none of it....just regular ABS. No wire for the switch, none of the extra wires for the traction control in the plug at the ABS pump. I replaced the dash harness and front body harness/fuse box with one from a car that had trac. This was done as part of a bigger mod.
Daytrepper is offline  
post #5 of 11 (permalink) Old 09-25-2012, 11:59 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
I didn't see any extre wires for traction control there's just one pci that communicates or both abs and traction.
Intrepticon is offline  
post #6 of 11 (permalink) Old 09-26-2012, 05:43 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Can some confirm this? Would like to know if I need to run more wires.
Intrepticon is offline  
post #7 of 11 (permalink) Old 09-26-2012, 07:39 PM
Intrepid Pro
 
Join Date: Feb 2002
Location: Virginia, U.S.
Posts: 14,279
Feedback: 4 / 83%
                     
Umm - if Dan says he did it, he did it. You can take dat to da bank!
peva is online now  
post #8 of 11 (permalink) Old 09-26-2012, 08:12 PM
I hit shit with sticks!


 
Daytrepper's Avatar
 
Join Date: Jan 2005
Location: Zebulon, NC
Posts: 34,294
Feedback: 20 / 100%
                     
Garage
Quote:
Originally Posted by wishihadacharger View Post
what plug at the junction box would you have had to install? The only thing I had to run was the switch on dash to Blue Plug behind cluster Pin 8 and the other wire to ground.
According to FSM 8W-40-3 I have all the wiring. Are you talking about under the hood? Cause even there I have all the wiring... 2 fuses in the PDC and one in the JB & the PCI Bus to the BCM then to cluster..
If you have a fuse, or terminals in position H and K in the underhood PDM, and positions 17 and 20 in the interior PDM, then you should have everything you need aside from the switch in the dash. After 2002 trac is all in the control module. This is assuming your car is not a "base"....IE missing cruise control, rear sway bar...etc...

My car had a 1998 system when we originally decided to add trac. I would have had to add a few things other than the switch wiring wise. However, instead of just adding trac, we upgraded the entire car to 02+ electronics. See my sig thread for pics. I had to think back to 2009 when we did all this. LOL.


1998 Dodge Intrepid
Ram Logistics Director; Danbo Truck & Diesel, Inc.
Proud sponsor of Just Junk It, LLC
President, Danbo Drumming Ventures, GmbH; Danbo-On-Drums

Last edited by Daytrepper; 09-26-2012 at 08:18 PM.
Daytrepper is offline  
post #9 of 11 (permalink) Old 09-26-2012, 11:36 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Quote:
Originally Posted by peva View Post
Umm - if Dan says he did it, he did it. You can take dat to da bank!
Relax wasn't saying he didn't was just confirming if I needed to add anything. Met with paintball dude tonight at got the pump & seats from him and other goodies. Really nice guy. He explained to me the major electrical you did Dan. My car is an SE but I have the police bumper and other things from other models. Paint figures it was one of the last so they meshed it all together.

When I get back down south & mods are done gonna upload some pics.
Intrepticon is offline  
post #10 of 11 (permalink) Old 09-27-2012, 07:24 PM
The Womanizer!

 
inthetundra's Avatar
 
Join Date: Mar 2007
Location: Central Wisconsin
Posts: 2,964
Feedback: 15 / 100%
                     
My 03 was completely swithced over. Complete wiring from 03 300M Special, added different pump, complete dash swap. I even added VTSS.
inthetundra is offline  
post #11 of 11 (permalink) Old 10-06-2012, 04:33 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Quote:
Originally Posted by Daytrepper View Post
If you have a fuse, or terminals in position H and K in the underhood PDM, and positions 17 and 20 in the interior PDM, then you should have everything you need aside from the switch in the dash. After 2002 trac is all in the control module. This is assuming your car is not a "base"....IE missing cruise control, rear sway bar...etc...
Alrighty took a look under the hood at the PDC I have fuses in postions H & K so I'm good there... as for the interior PDM do you mean the interior fuse pannel by the drivers door? if so then I'm good there also everything has a fuse...

My car is listed as an SE but I have wiring that's part of a police package...I have cruise but no rear sway...got the traction control module from Paintballdude gonna have dealership install it soon (so they can bleed brakes properly & do a flash if needed)...

But everything looks like its there and good to go.

"The Intrepticon" Click Image for Mods & Pics

Intrepticon is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome