hi new here and need a little assistance - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 3 (permalink) Old 11-27-2012, 11:02 PM Thread Starter
Intrepid Newbie
 
Join Date: Nov 2012
Location: canada
Posts: 2
Feedback: 0 / 0%
 
hi new here and need a little assistance

apperently the oxygen sensor in my 02 intrepid has pooped out. i was told it was the exaust one. suppose to be easy to change. anyone know where i can get a newsensor inexpensivly and can anyone post a pic of exactly where this sensor is?? it would be super appreciated. and do i need a special socket?? i watched a video of a guychanging a sensor on an 02 neon and he just cut the cable, used a long round ended wrench and removed it. then he unplugged the other end of the sensor. put the new sensor in using an open ended wrench then connecter the cable to the old one. he said something about it not being sealed by,oh crap i cant rememeber and it was important. i had to have one that wasthis way or had to do this to one for protection. can you over tighten the sensor and wreck it?? looks like im doing this myself and the more info i have the better. did manage to change my own clock spring this past thursday all by myself, kinda proud and it works. no airbag light and i have a horn again. im rambling. anyhw i appreciate any picturs an input for this job. thanks again. glad i found you!!
chuckfan67 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 11-27-2012, 11:52 PM
Intrepid Pro
 
micholob's Avatar
 
Join Date: Oct 2005
Location: Osceola, IA
Posts: 2,455
Feedback: 4 / 83%
                     
There are 4 of them. You need to pull the codes to find out which one it is. To do this turn the key on, off, on, off and then leave on. Do not start the car when doing this. The codes will display on the odometer. You can find the sensor socket at harbor frieght or borrow it from most parts stores.

Folks on here do not recommend an aftermarket sensor as they do not work well with our cars. You can get a used one pretty cheap from a junkyard or get an oem one.
micholob is offline  
post #3 of 3 (permalink) Old 11-28-2012, 11:13 AM
tgs
Intrepid Pro
 
Join Date: Aug 2006
Location: Portland, Oregon thru March 31, 2016
Posts: 1,387
Feedback: 2 / 100%
                     
Two on the driver side (left) and two on the passenger (right) side.
One before the cat (pre-cat) and one after the cat (post-cat).

The pre-cat sensors are easy to see.
One is under the AC compressor. The other is under the Alternator.

The post-cat sensors are harder to see and get to;
just follow the exhaust pipe down and you'll find them on either side of the tranny.

Most of the time the code will be 420 and/or 432.
These two codes relate to the post-cat sensors (which sounds like your issue).
My bet is that you will have one or both of these codes.

If you go to "Advance Search" and enter "p0420"
and select "Dodge Intrepid Second Generation Forums",
you can read up on all the different things people have learned over the years.

A couple things come to mind:
..Never change just one sensor. Change them in pairs, buying one pre-cat and one post-cat.
..Instead of changing a pair of sensors, use the non fouler trick on the post-cat sensor.
..(I am looking into installling non foulers on my current ride; 03 SXT)

And remember, the search function is your friend.

Last edited by tgs; 11-28-2012 at 11:20 AM.
tgs is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome