How do I Replace a Front Corner Light [Archive] - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat

: How do I Replace a Front Corner Light


wowza92
03-05-2008, 11:31 PM
My daughter bumped into something with her 97 Intrepid and broke a front corner directional light. Are these difficult to replace? Does anyone have instructions for the replacement?

Strongt
03-05-2008, 11:35 PM
Signal and Marker Lights

REMOVAL & INSTALLATION



Front Parking, Side Marker and Turn Signal

CONCORDE, INTREPID AND VISION

See Figures 1 and 2

http://www.autozone.com/images/cds/jpg/small/0900823d80182be0.jpg
Fig. 1: Disengage the clips holding the lamp to the module-except New Yorker and LHS



http://www.autozone.com/images/cds/jpg/small/0900823d80182be1.jpg
Fig. 2: Pull the socket from the unit and remove the bulb if needed



Release the hood latch and open the hood.

Remove the clip holding the lamp to the headlamp module.

Pull the lamp forward and remove the lamp from the vehicle.

Remove the socket from the lamp. If it is necessary to remove the bulb, pull the bulb out of socket.

To install:

Push the bulb into the socket if removed.

Install the socket into the lamp.

Place the lamp into position on the vehicle.

Push the lamp rearward and engage the clip to hold the lamp to the headlamp module.

Verify the lamp operation.

otpw1
03-06-2008, 12:49 AM
The advantages of LEGO cars......

wowza92
03-06-2008, 08:50 AM
Perfect! Thanks for your quick and comprehensive reply.

Joe