DodgeIntrepid.Net Forums banner

Intrepid Heater Core(Intrepid 94)

2K views 5 replies 5 participants last post by  craigmwrght 
#1 ·
Can someone please tell me about thier experience with having thier heater core replaced in an first gen Intrepid. Whether you did it yourself or had it done at a shop.

Thanx:confused:
 
#4 ·
its a big job, you have to remove the entire dash and then the HVAC unit ( heating/cooling unit) behind the dash . Inside the HVAC is the heater core.
 
#5 ·
I did this, and it's a real big job. It took a couple of evenings but you don't need any special tools except to disconnect the AC lines. If you do decide to do it, be aware you'll need to have your AC refridgerant bled (if your lucky enough to have any), and you'll probably have to replace the hoses and hose clamps leading to the core. There's no way of getting the heater core out without disconnecting the AC evaporator.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top