DodgeIntrepid.Net Forums banner

need help please read

491 views 1 reply 2 participants last post by  argus 
#1 ·
i have got the following codes
35: fan control relay circut
33: acpressure tohigh or low
35: fan control relay circut
65: manifold tune valve solenoid circut
31: evap purge flow monitor failure
42: fuel level
32: egr

As i was driving home from school, half way home my cel flickered a coulple time then shut off. at first i thought the egr cleaned itself up. So when i got home i checked the codes and i got this mess. any help is really appreciated. thanks

one more question, when i start the car up in the morning the car shoots up to 2,000 rpm's then down to 1200 rpm's untill the engine gets warm. it just started doing this in the past month. thanks
 
#2 ·
rdj59 said:
i have got the following codes
35: fan control relay circut
33: acpressure tohigh or low
35: fan control relay circut
65: manifold tune valve solenoid circut
31: evap purge flow monitor failure
42: fuel level
32: egr
Ugh... that's a bunch of codes for sure. I'd probably disconnect the battery to reset the codes. Then, see if they come in separately are all at one time. If all the codes get set at the same time, then maybe all the components you listed are all in the same harness, and the harness came loose at one of it's connection points.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top