DodgeIntrepid.Net Forums banner

Temperature Control

780 views 2 replies 2 participants last post by  familymatters2us 
#1 ·
I have a temperature control that does not work. It only blows cold air and the knob has no resistance when I turn it. The unfortunate thing is that I fixed this once before but cannot remember the routing of the vacuum line that makes it work. I have consulted the Hayes manual but it is not in there.
I have found a control of some sort onthe fire wall near the area where the heater core would be, but it looks like those lines are okay.
Please help! It's cold here in Windsor Ontario.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top