2.7 torque specs? [Archive] - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat

: 2.7 torque specs?


klutch
04-28-2007, 05:25 PM
can anyone tell me what the torque specs for the 2.7 cylinder heads are?

95LHS
04-28-2007, 05:44 PM
For the 8 bolts on the sides of each head:

1.) 35 ft-lbs
2.) 55 ft-lbs
3.) 55 ft-lbs (recheck I think)
4.) +90 degrees do not use a torque wrench for this step

For the 3 bolts at the front of each head:
1.) 250 in-lbs


Lubricate the threads with clean motor oil before installing.

If reusing the old bolts, check them for necking by using a straight-edge and making sure it touches all of the threads.

Ronbo
04-28-2007, 10:07 PM
All that and more can be found here: http://www.dodgeintrepid.net/forums/showthread.php?t=73557

klutch
04-29-2007, 08:30 AM
maaaan, i did every possible search to try and find the info, but i didnt try the heading "service manual" thanks a million Ronbo!

95LHS, thank you for the detailed information, not even the dealer would give me the specifics!!