Ok so here is my issue, the Chrome plate split from the retainer on my 300M Center cap:

http://www.cis.umassd.edu/~u_sgeary/300MPic/CenterCap/cc1.JPG http://www.cis.umassd.edu/~u_sgeary/300MPic/CenterCap/cc2.JPG http://www.cis.umassd.edu/~u_sgeary/300MPic/CenterCap/cc3.JPG

As you can see the back of the chrome is really pitted, I want to fix them, but am unsure what to use, any Ideas?

when I made my center caps I just sanded down the backing plate using my dremel and then attached the new faces with a two-part epoxy

Two-part epoxy seems the way to go :)

Originally posted by JoeKD
when I made my center caps I just sanded down the backing plate using my dremel and then attached the new faces with a two-part epoxy That was accually exactly what I said in chat.

I used JB weld.

Originally posted by Dee Durant
I used JB weld.

yes, JB weld is an excellent 2 part epoxy for this job