DodgeIntrepid.Net Forums banner

V3 Intake Spacer Coming Soon... Need input and a list for group buy!

14K views 134 replies 20 participants last post by  Loaner 
#1 · (Edited)
Hey guys,

So I recently purchased one of the original intake spacers from a club member and I plan on reproducing it. My idea is to use my intake spacer as a donor to be recreated digitally through some software I have access to at my University. Ideally, I should just be able to transfer measurements into the computer and then send the file over to a machine shop for production. I already have a good friend lined up to make the parts and I trust him to make a quality product. I have already worked with him in the past with the production of other parts and accessories.

Here are a few details about the spacer itself form previous threads..

It is an aluminum spacer that goes where the gasket between the intake plenum and lower intake manifold goes. It is shaped like the gasket but is thicker - 3/8" thick - so it raises the intake plenum up 3/8". The longer air flow path increases mid to high end torque.

It gives 30 ft-lbs of added torque in the middle rpm range
SPAD3 said:
Here are the dyno results. This mod is one of the few that are custom made. The are precision cut to match the lower intake perfectly. Over 35 are currently installed, with no returns.

It increases the runner length, lowering the power band, which adds to the torque. Its one mod you can feel the difference with. Some have *reported* a gain of 1-2 MPG. This is unconfirmed though. I noticed a 1 MPG change in my personal cars.

V2 Spacer - Image from Spad3

V2 Spacer - Image from Spad3

Current CAD model in progress...

Current Package Deals

Core Package - $150 + $15 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)

99-early02 "EGR" Package - $150 + $55 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)
- Extended EGR Tube ($40 core charge refunded when old tube is mailed back)

Core Gasket Kit - $24.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket

99-early02 "EGR" Gasket Kit - $28.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket
- 70720 EGR Mounting Gasket
- x2 72928 EGR Tube Seal

I wanted to start a list of those who are JUST interested in getting a V3 Spacer, this is not a commitment list, just a list for me to get an idea on who would be interested in buying one.

Updated List*

If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. hrmwrm (LH)
9. chosen3001 (300M Club)
10. srt420 (LH)
11. Henry (N/A)
12. Cornelius (300M Club)
13. SilverSpecial (300M Club)
14. 02SilverSpecial6.1 (300M Club)
15. Fromans4 (LH)
16. Avalancha805 (DI)
17. akiharho- ledgic_13 (300M Club)
18. '87IROCZOWNER69 (DI)
19. BiliTheAxe (DI)
20. Mopar340dave (300M Club)
21. BXZ (300M Club)
22. BatCaveTrep (DI)
23.
24.
25.

Thanks again,
-Ryan
 
See less See more
3
#39 ·
would make a smooth transition from upper to lower. as long as the spacer is beyond the openings of the upper. i think any protuberences that create a shelf might be a problem.
then again, look at port plates for big block chevies. there's something that blocks the port, yet creates better flow.
 
#42 ·
Yeah see this is exactly what concerns me! Sometimes the offset of the two is a GOOD thing and helps air flow. One would think, the smoother the transition the better but that may not always be the case. I think I will leave it the way it is and then if its desired to make a smooth transition then you can just sand out the plenum.

Sound ok?
 
#47 ·
I think for now I'm going to leave it as is, as tested, as dyno'd lol.

If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13.Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16.
17.
18.
19.
20.
 
#48 · (Edited)
Here is a reply I made on the 300M Club

At this point in time, I'm not planning on moving the price that has been posted. The variance in my cost per unit doesn't vary much and although more people have decided they want one, I have also incorporated features into the spacer that will increase my cost. So in a way it balances itself out.

What I intend on doing is selling the spacer at $150 shipped per unit.

You can get the following packages.

Core Package - $150 + $15 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)

99-01 "EGR" Package - $150 + $55 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)
- Extended EGR Tube ($40 core charge refunded when old tube is mailed back)

Core Gasket Kit - $14.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket

99-01 "EGR" Gasket Kit - $18.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket
- 70720 EGR Mounting Gasket
- x2 72928 EGR Tube Seal

The prices on gaskets HOPEFULLY will be lower. These are retail prices. Hopefully I can get them down for everyone if I buy them in bulk. However, in order to do so, I would have to strongly encourage members to buy the gaskets from me and not an online retailer so I can stock more gaskets and get a better "bulk" purchase price for the group. Essentially I will be selling these with little to no mark up on my cost. Everyone needs them replaced so why not help you all out with getting them cheap.

Thoughts on the packages? Core charges sound okay to everyone? This is my idea for sales because not everyone needs the same things.

Thoughts?
 
#50 ·
If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13.Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17.
18.
19.
20.
 
#54 ·
If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13.Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17.Avalancha805 (DI)
18.
19.
20.
Thnx
 
#55 ·
The price of shipping would have to be negotiated when the Spacers are produced and ready to ship. I have shipped things all over the world so shipping to Canada is not an issue. If you are close to the border there are often places you can pick up a package from for a small fee, assuming you trust their business.

Otherwise I will find the best method to send you one.


Awesome I am siked. When does this go into production?
I just need measurements off a plenum and I can submit the CAD file for a prototype. The sooner I can get these measurements the faster it will be out and in your car haha. Unfortunately I don't have $100 to invest on a plenum to take a few measurements off of.

I'm interested in one. Let me know if they are still available. Thnx
None have been released yet but I will make it public when they are complete. Thank you for signing up on the list!

Updated List*
If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13.Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17.Avalancha805 (DI)
18.
19.
20.
 
#57 ·
We will play it out and see what is cheaper for you. I would estimate shipping to be $26 - $34 and in that case you might just want to pay the costs to have it shipped rather then take a 4 hour drive. I'm not sure what you have to claim at customs lol. You do whatever you think is best lol

As far as the parcel goes, I will try to minimize any duty that may be charged. I will mark it as a gift and write something like metal plate or something idk?

-Ryan
 
#59 ·
i wouldn't worry about customs. it's a 50/50 crapshoot.
out of 2 parcels ronbo sent me, both over $100, one had nothing, and one came with $17 on it.
most parcels i get have nothing owing on them. out of 5 canadians, maybe 2 might get duty due, and it would only be about $15 or less.
 
#60 · (Edited)
Updated List

1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13. Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17. Avalancha805 (DI)
18. akiharho- ledgic_13 (300M Club)
19.
20.

ALSO!!

Does anyone have a spare plenum they can take dimensions off of? Or access to dimensions? This is the only thing holding me back right now.
 
#64 ·
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13. Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17. Avalancha805 (DI)
18. akiharho- ledgic_13 (300M Club)
19. '87IROCZOWNER69 (DI)
20.
 
#65 ·
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13. Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17. Avalancha805 (DI)
18. akiharho- ledgic_13 (300M Club)
19. '87IROCZOWNER69 (DI)
20. BiliTheAxe
 
#66 ·
Still stressing this guys.

If anyone has a spare plenum that they can get dimensions off of, I really need them!!! I can't finish the spacer until I get these! The sooner I can get dimensions the sooner I can have the finished product ready to ship!


Updated List

1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. Ledgic_13 (LH)
9. hrmwrm (LH)
10. chosen3001 (300M Club)
11. srt420 (LH)
12. Henry (N/A)
13. Cornelius (300M Club)
14. SilverSpecial (300M Club)
15. 02SilverSpecial6.1 (300M Club)
16. Fromans4 (LH)
17. Avalancha805 (DI)
18. akiharho- ledgic_13 (300M Club)
19. '87IROCZOWNER69 (DI)
20. BiliTheAxe (DI)
21.
22.
23.
24.
25.
 
#67 ·
Also, I sent a PM out to everybody that was interested. I have heard back from most but I'm still waiting on 8 more people! PLEASE, check your inbox and reply to the message! I need this info to order the gaskets THIS Friday! If I don't hear back from you, you will NOT get priority on gasket kits. I will order a small amount extra but these are not going to be any guarantee's.

If you didn't get the message it goes as follows:

Hello,

According to my thread, I have you marked as being interested in a V3 Intake Spacer. As the design is just about finished, I need to get a few quick answers from everybody in regards to several things. If you could please fill out the following in a reply to this message it would be HIGHLY appreciated. Those that do will have considerable leverage then those who do not.

Year -
Make -
Model -
Engine Size -

Next please choose 1-2 of the four packages below. By no means is this a commitment to buy, but just so I know approx how many gaskets to order for the group buy. I'm trying to help everyone out and get a good price on gaskets (these are max. prices presented, the more interested, the lower the price gets).

Core Package - $150 + $15 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)

99-early02 "EGR" Package - $150 + $55 core
- Intake Spacer
- Extended Bolt Set
- Altered Plenum Brackets ($15 core charge refunded when old brackets are mailed back)
- Extended EGR Tube ($40 core charge refunded when old tube is mailed back)

Core Gasket Kit - $14.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket

99-early02 "EGR" Gasket Kit - $18.50
- x2 MS91990 Plenum Gasket
- 61068 Throttle Body Gasket
- 70720 EGR Mounting Gasket
- x2 72928 EGR Tube Seal
'87IROCZOWNER69, I was not able to send you a PM because your inbox is full. Please clear it and PM me back ASAP!
 
#68 · (Edited)
After ordering about $700 worth of gaskets this weekend I realized I made a mistake with the pricing on the gasket kits. I quoted for 1 gasket rather then 2. I must have come up with the figures before I decided to add the gasket groove on the spacer. Unfortunately these things are $10 each and at 50 units that's nearly $500 alone for just the plenum gaskets!!

Hopefully no one minds the $10 increase and I'm sorry for the mistake!

Updated List*

If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. hrmwrm (LH)
9. chosen3001 (300M Club)
10. srt420 (LH)
11. Henry (N/A)
12. Cornelius (300M Club)
13. SilverSpecial (300M Club)
14. 02SilverSpecial6.1 (300M Club)
15. Fromans4 (LH)
16. Avalancha805 (DI)
17. akiharho- ledgic_13 (300M Club)
18. '87IROCZOWNER69 (DI)
19. BiliTheAxe (DI)
20. Mopar340dave (300M Club)
21. BXZ (300M Club)
22.
23.
24.
25.
 
#74 ·
Thanks! I appreciate it. Hopefully I can get into making more parts to help out the LH community.. assuming everything with this goes smoothly! All these gaskets makes me eager to get a prototype out ASAP!

PS. What you see is only half of what I ordered :p What have I got myself into lol
 
#76 ·
. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. hrmwrm (LH)
9. chosen3001 (300M Club)
10. srt420 (LH)
11. Henry (N/A)
12. Cornelius (300M Club)
13. SilverSpecial (300M Club)
14. 02SilverSpecial6.1 (300M Club)
15. Fromans4 (LH)
16. Avalancha805 (DI)
17. akiharho- ledgic_13 (300M Club)
18. '87IROCZOWNER69 (DI)
19. BiliTheAxe (DI)
20. Mopar340dave (300M Club)
21. BXZ (300M Club)
22.BatCaveTrep (DI)


Definately interested, but will have to come at tax time. :)
 
#77 ·
I'm sorry but they won't be done by Christmas. I don't want to rush anything. Its a good Spring install anyway :)

I'm just waiting on a few last measurements before I send it off.

Updated List*

If you are interested add your name to the list below:
1. Austin R/T (DI)
2. Adpros (DI)
3. YesImLDS (DI)
4. DjGreggieP (DI)
5. Bigde024 (DI)
6. Kent Vice (300M Club)
7. 300M-Mike (300M Club)
8. hrmwrm (LH)
9. chosen3001 (300M Club)
10. srt420 (LH)
11. Henry (N/A)
12. Cornelius (300M Club)
13. SilverSpecial (300M Club)
14. 02SilverSpecial6.1 (300M Club)
15. Fromans4 (LH)
16. Avalancha805 (DI)
17. akiharho- ledgic_13 (300M Club)
18. '87IROCZOWNER69 (DI)
19. BiliTheAxe (DI)
20. Mopar340dave (300M Club)
21. BXZ (300M Club)
22. BatCaveTrep (DI)
23.
24.
25.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top