Help 2000 Intrepid ES 3.2L - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat

Firemnted · 10-30-2012, 11:16 PM

I recently replaced the PCM because I found pinched wire's to injector 3 and fixing the wires didn't fix it! It is a little over dew for new plugs I think they recommend changing them at 60,000-80,000 miles and I got about 120000 on then and #3 got flooded out and I didn't change it yet! could this be the problem?

Firemnted · 10-30-2012, 11:18 PM

I just changed the plugs and no change! Could it be bad programing with the computer?

**mnitetrain** · 10-31-2012, 07:43 AM

Did you reset computer (disconnect battery 1/2 hour)?? What plugs did you use??

Firemnted · 10-31-2012, 06:50 PM

I just reset the computer at work left it disconnected for 2 hrs! I used Bosch Platinum +4's. I ran them last time and I just changed them because of the starting problem and they had 120000 miles on them

**mnitetrain** · 11-01-2012, 07:35 AM

Most of us that ran the +4's have replaced them with stock Champions or the NGK special plugs.

Were some scary stories of electrodes coming off the +4's.