[argentaz]

Hi ,

I bought 20inch for my 300M with 245/35/ZR20 tires and I'm thinking to lower the car by 1.2inch (in reality 1.5) with the H&R springs.

My doubt , maybe bcz the car is gonna be lowered the mags gonna touch the fender ?! Or the tires gonna rubbing ?

Or maybe someone already did this setup ?

Let me know what do you think
Thanks in advance guys

[avalancha805]

I'm in the same boat, I need help as well. I'm thinking about lowering my 300m special, I already have 20' wheels and the eibach springs, just don't know if it's going to be too low with the ground effects the car has.
Thanks guys.

[argentaz]

From my point of view there's gonna be enough space between the fender and the tire to lower the car safely with no problem Anyways , I'm gonna do it no matter what! Thank to ALL of you for the MULTIPLES answers!

[shadowvox6]

Better roll the rear quarters, and fenders for that matter.
Or you'll have big trouble.

[03SE]

How wide are your wheels? Any suspension mods?

[avalancha805]

Did you ever get to install the springs? if so, how is the ride and can you post some pics?