DodgeIntrepid.Net Forums banner

2.7 torque specs?

36K views 5 replies 4 participants last post by  Ronbo 
#1 ·
can anyone tell me what the torque specs for the 2.7 cylinder heads are?
 
#2 ·
For the 8 bolts on the sides of each head:

1.) 35 ft-lbs
2.) 55 ft-lbs
3.) 55 ft-lbs (recheck I think)
4.) +90 degrees do not use a torque wrench for this step

For the 3 bolts at the front of each head:
1.) 250 in-lbs


Lubricate the threads with clean motor oil before installing.

If reusing the old bolts, check them for necking by using a straight-edge and making sure it touches all of the threads.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top