I'm going to be replacing the cradle bushings and after reading the poly bushing threads i anticipate the bolts being garbage and possibly the welds on the nuts breaking loose so i would like to have new bolts and nuts in the event that anything gos wrong before i start the job.
i don't want to pay the stealership what they want for them.
Engine cradle bolt part# 6502812.
price per $7.14.
price set $28.56.
so does anybody know what the thread size is for the bolts?
thanks allot guys Ty.
P.S. i will be getting the poly bushings.
I think those bolts are pretty specialized. Like the length, pitch, and definitely grade would be difficult to find with a bolt that big. Probably wouldnt be a bad idea to grab a spare or two at the yard.
the bolts are high grade you should be fine, i have done 4 sets of them and haven't sheard off one.
but i have seen if you use a air impact wrench you can break off the welds on the nuts. use a long
breaker bar and do it by hand it's alot more work but worth it in the long run.