Can anyone help me figure out what this error means. I looked it up in the FSM and it says "No CCD/J1850 messages received from the electronic transmission control module (EATX) or the Aisin transmission controller". Now my problem is how can I fix this problem as I have no idea what any of this means. Thanks in advance for any help
I'll let you know. I think I have bigger problems than just that. Now after you start driving all the gauges go dead and all the idiot lights come on. The odometer goes blank and then displays "no bus". When I do the key dance I now get trouble codes 1698, 1695, 1687. It seems no messages are being recieved from the TCM, BCM or ECM. I don't have a clue what to do now. Any thoughts?
That seems to make sense. When you turn the ignition to start everything works fine but once you start it everything goes haywire. Sometimes when you are driving it will all come back on but not for long. How hard is it to replace the ignition switch?
Daytrepper you are the man! I decided the ignition switch was cheap enough to replace so I picked one up...$30. So far everything is working like it should now. I haven't driven it yet but it seemed fine when I started it up in the driveway. Even OTIS is again working like it should. Thank you so much.