If all you want to connect is the turn signals, you have to add one wire, heated add another wire, auto dim two more wires, the rest are for the memory positions from the heat and memory seats. Let me know exactly what you want to hook up and I'll try to help as best as I can. The turn signal mirror wire for the drivers side goes to junction block brown connector #6 cavity #11 green wire which is the wire between a tan wire and a Violet with black stripe wire in the corner. The passenger side goes to the tan wire next to the green one just mentioned and a red with white stripe wire. Or you can tap into these wires under the plastic scuff molding at the base of the drivers door opening.
The defrost wire for the heated part of the mirror might already be on the connector of the body harness which is where the door harness plugs into the car side, it's a light blue with yellow stripe wire. If it's not there you have to run a wire fron the defrost relay (300M and Concorde only) on the passenger side in the trunk by the tailight. This should be a 10 amp fused wire.
Last edited by YB Normyl; 03-02-2003 at 05:00 PM.