OK I have looked through all the old posts and still can't find any answers.I have a 93 es and I can't get the remotes to program.I have tried jumping the trac switch,but nothing happens.I have the rke module under the upper part of the dash and I am assuming it is working because the doors auto lock when rolling.The only other problem I might have is that the remotes are the wrong ones.Does anybody know how to tell if the remote is the correct one for my car.The remote model/fcc # is abod3d3t.My trep is one of the very early models built in 93(before 6/93).Any ideas?
The earliest remotes from '93, and I believe '94, had an outline of a car with the trunk open on the 3rd button. '95 and up got a different receiver in the dash along with a 3rd button on the fob with the words "press twice" and a very small pic.
Which one(s) do you have?
I have a 93 Vision and if you are looking at the remote from the top it says unlock with an arrow pointing up, then to the right lock with an arrow pointing down, and below those two in the middle is a picture of a car with the trunk up. then below that is the pentastar. Hope this helps
They don't have the pentastar,but I know they are from a Chrysler product because I remember getting them before the car went to auction.I just don't remember exactly what kind of car it was.Guess I will try to track down another one and see if it works.Thanks for the help guys.
>They don't have the pentastar,but I know they are from a Chrysler product ..
They may be from a Mitsubishi with Dodge or Chrysler badging, in which case they're probably not compatible.
newyorker1985 has described what you need to find. I have 2 here, pm me with your email addy and I can take a picture of 1 and send it to you.