Riddle me this, how can I crank the power window down on a disconnected door? - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 8 (permalink) Old 03-28-2012, 10:10 AM Thread Starter
Intrepid Fan
 
Join Date: Mar 2012
Location: Canada
Posts: 106
Feedback: 0 / 0%
 
Riddle me this, how can I crank the power window down on a disconnected door?

I need to get the chrome trim around the window off. I took like it might be easier with the window down.

Anyone know the pin order of the wires on the power window motor and what I got to jump to put the window down?

Or do I even need to put the window down? That trim looks like it's only stuck on.
lbrowne is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 03-28-2012, 12:00 PM
Intrepid Modder
 
luckkky13's Avatar
 
Join Date: May 2009
Location: darien il
Posts: 917
Feedback: 0 / 0%
                     
The window should be down, and look really carefully at where the screws are placed. when i did mine i missed a screw and bent the trim. off to the yard to get new trim. i know there is a screw under the black plastic cover on the door, think there is a piece of clear tape you need to remove to get access to the screw..
luckkky13 is offline  
post #3 of 8 (permalink) Old 03-28-2012, 12:18 PM
Intrepid Fan
 
Join Date: Apr 2009
Location: TN
Posts: 136
Feedback: 0 / 0%
       
I can't help with which wires will operate the window but you can use an 18v battery from a cordless drill or similar tool to operate it once you know the wires you need to be on.I've used them at yards to move power seats to get to the rear bolts.
MarkTN is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 03-28-2012, 12:35 PM Thread Starter
Intrepid Fan
 
Join Date: Mar 2012
Location: Canada
Posts: 106
Feedback: 0 / 0%
 
Quote:
Originally Posted by luckkky13 View Post
The window should be down, and look really carefully at where the screws are placed. when i did mine i missed a screw and bent the trim. off to the yard to get new trim. i know there is a screw under the black plastic cover on the door, think there is a piece of clear tape you need to remove to get access to the screw..
Yeah I almost bent the trim, I let off the second I realized what was about to happen. Thank God I didn't kink it.

So you're saying there's a screw in the pillar portion?
lbrowne is offline  
post #5 of 8 (permalink) Old 03-29-2012, 03:47 AM
Intrepid Pro
 
hrmwrm's Avatar
 
Join Date: Oct 2011
Location: Sangudo, AB
Posts: 1,083
Feedback: 1 / 100%
                     
this is at a wreckers? remove inner panel. cut wire going to motor with some length. strip ends. as above with the battery. flip wires around on contacts to get desired direction.
hrmwrm is offline  
post #6 of 8 (permalink) Old 03-29-2012, 10:41 AM Thread Starter
Intrepid Fan
 
Join Date: Mar 2012
Location: Canada
Posts: 106
Feedback: 0 / 0%
 
Quote:
Originally Posted by hrmwrm View Post
this is at a wreckers? remove inner panel. cut wire going to motor with some length. strip ends. as above with the battery. flip wires around on contacts to get desired direction.
Nope actually I got it in my garage, so even easier. I'll give it a shot tonight.

Thanks!
lbrowne is offline  
post #7 of 8 (permalink) Old 03-29-2012, 12:50 PM
Intrepid Modder
 
luckkky13's Avatar
 
Join Date: May 2009
Location: darien il
Posts: 917
Feedback: 0 / 0%
                     
Not the b pillar, its behind the plastic triangle piece that pops off enclose to the edge of the door there should be a piece of clear plastic that needs to be removed and the screw is in that hole. SAy not being to accurate but im typing on my phone... just take your time.
luckkky13 is offline  
post #8 of 8 (permalink) Old 03-30-2012, 09:17 AM
Intrepid Pro
 
gn300's Avatar
 
Join Date: Aug 2005
Location: Aylesford, Nova Scotia
Posts: 2,461
Feedback: 0 / 0%
                     
I was going to say a hammer but you might want to put it back up!
gn300 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome