Replacing Multifunction switch - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 6 (permalink) Old 11-10-2004, 12:05 PM Thread Starter
 
Join Date: Nov 2004
Posts: 2
Feedback: 0 / 0%
 
Replacing Multifunction switch

I'm having problems with my headlights and I think it has something to do with the multifunction switch.

Does anyone have step by step instructions on how to remove/replace it (preferrably with pictures)?

Thanks


*** forgot to mention, this is for a 1997 Intrepid 3.3L

Last edited by James_WB; 11-10-2004 at 02:22 PM. Reason: Forgot to mention.....
James_WB is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 11-10-2004, 12:58 PM
 
Join Date: Aug 2003
Posts: 2,536
Feedback: 3 / 100%
                     
It's very easy, probably about 30 minutes. A quick search of the forums will find the info you need.
'98-ESer is offline  
post #3 of 6 (permalink) Old 11-10-2004, 02:21 PM Thread Starter
 
Join Date: Nov 2004
Posts: 2
Feedback: 0 / 0%
 
I've done a couple of searches, but I haven't found anything. Should I be searching for anything other than multifunction switch?
James_WB is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 11-10-2004, 03:15 PM
 
Join Date: Jun 2002
Posts: 131
Feedback: 0 / 0%
 
Easy, first remove battery cable (so the airbag doesnt accidentally popp out), then remove the 6 screws (on botton of steering wheel), remove tilt bar (keep it handy for ups and downs), remove upper and lower plastic covers...remove 2 screws from switch that holds it in place..remove 2 connectors...and reverse for installation...switch should run $110 U.S.


Search Headlights or Foglights (search for the problem, for the solution)

Last edited by bphillips161; 11-10-2004 at 03:16 PM. Reason: adding info
bphillips161 is offline  
post #5 of 6 (permalink) Old 11-11-2004, 11:38 AM
 
Join Date: Feb 2004
Posts: 273
Feedback: 0 / 0%
               
There are a few posts... I'm at work, don't have time to find 'em for ya... I know, 'cause I was in 'em last month... It's an easy job... Just don't try to do it on your lunch break... LOL... or you'll end up gettin pissy in the parking lot at work... :-D Oh well... hehe... Good luck
Kenny
Icecream Man is offline  
post #6 of 6 (permalink) Old 11-13-2004, 04:35 PM
 
Join Date: Nov 2004
Posts: 17
Feedback: 0 / 0%
 
On our 1997 I had to get the reverse torx (posi-drive) socket set to remove the two bolts that hold the MFS to the steering column.
canmrotax is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Similar Threads
Thread Thread Starter Forum Replies Last Post
multifunction switch again 97rebuilt General Discussion (First Generation) 11 04-17-2004 11:49 PM
multifunction switch going bad??? DANWIESE General Discussion (First Generation) 8 01-21-2004 09:48 PM
aftermarket multifunction switch and mirror? insane driver Performance / Modifications (Second Generation) 6 01-05-2004 07:55 PM
Anyone one know which wire is High and Low Beams on Multifunction Switch? TreppyES General Discussion (First Generation) 2 11-20-2003 02:11 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome