Will this fit? - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 14 (permalink) Old 12-19-2004, 02:11 AM Thread Starter
Intrepid Pro
 
Imadreadhead's Avatar
 
Join Date: Aug 2004
Location: Myrtle Beach, South Carolina
Posts: 2,199
Feedback: 4 / 100%
                     
Will this fit?

on a 1998 concorde

I almost bought it but thought id ask you guys first..

http://cgi.ebay.com/ebaymotors/ws/eB...category=43951
Imadreadhead is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 12-19-2004, 02:28 AM
 
Join Date: Jun 2004
Posts: 627
Feedback: 1 / 100%
                     
if your cluster looks the same im sure it will
veks039 is offline  
post #3 of 14 (permalink) Old 12-19-2004, 03:06 AM
Intrepid Pro
 
dakotaquadsport's Avatar
 
Join Date: Oct 2003
Posts: 4,994
Feedback: 0 / 0%
                     
Your cluster has the round gauges just like that? Or the kinda ovalish, half moon tach gauges? If I'm thinking of the ones you have, that won't fit.

edit...nevermind, i looked at your car domain page. You need the round gauges that were in the later years for that to fit.
dakotaquadsport is offline  
Sponsored Links
Advertisement
 
post #4 of 14 (permalink) Old 12-19-2004, 06:52 PM
Intrepid Newbie
 
Boberle1150's Avatar
 
Join Date: Feb 2004
Location: Toledo, OH
Posts: 85
Feedback: 0 / 0%
         
So would this fit over the 300M or LHS guages, cause I have that in my Concorde, and I think that would look sweet
Boberle1150 is offline  
post #5 of 14 (permalink) Old 12-19-2004, 07:02 PM
 
Join Date: Nov 2004
Posts: 109
Feedback: 0 / 0%
 
dude wait if u think its chrome its not fire and ice scammed me i thought it was chrome but instead i got a shiny peice of metal stain less steal
lvslimsdodge is offline  
post #6 of 14 (permalink) Old 12-19-2004, 11:03 PM
 
Join Date: Apr 2002
Posts: 5,763
Feedback: 11 / 100%
                     
The Concorde cluster comes down lower at each end and the guage layout is different.



Here's the Dodge


300M
YB Normyl is offline  
post #7 of 14 (permalink) Old 12-19-2004, 11:05 PM Thread Starter
Intrepid Pro
 
Imadreadhead's Avatar
 
Join Date: Aug 2004
Location: Myrtle Beach, South Carolina
Posts: 2,199
Feedback: 4 / 100%
                     
yea i figured out it wouldnt fit..o well..how hard it is to swap out to dodge gauges?
Imadreadhead is offline  
post #8 of 14 (permalink) Old 12-19-2004, 11:47 PM
 
Join Date: Sep 2004
Posts: 16
Feedback: 0 / 0%
                     
is it hard to replace the dodge gauges with the 300M gauges ?
(v)adness! is offline  
post #9 of 14 (permalink) Old 12-20-2004, 12:08 AM
 
Join Date: Apr 2002
Posts: 5,763
Feedback: 11 / 100%
                     
300M guages will fit in the Trep easily, they're practically the same.
I'm not sure about the Dodge to Concorde but I think someone on the board has either tried it or done it.
YB Normyl is offline  
post #10 of 14 (permalink) Old 12-20-2004, 12:15 AM Thread Starter
Intrepid Pro
 
Imadreadhead's Avatar
 
Join Date: Aug 2004
Location: Myrtle Beach, South Carolina
Posts: 2,199
Feedback: 4 / 100%
                     
what about 300m to concorde..

neither of them should be differnt
Imadreadhead is offline  
post #11 of 14 (permalink) Old 12-20-2004, 12:29 AM
 
Join Date: Apr 2002
Posts: 5,763
Feedback: 11 / 100%
                     
The LHS and Concorde Limited use the same dash as the 300M but the Concorde LX and LXI have a different dash with the more curved cluster front half. The rear half will screw on but I'm not sure if it will line up with the glass section.
YB Normyl is offline  
post #12 of 14 (permalink) Old 12-20-2004, 12:38 AM Thread Starter
Intrepid Pro
 
Imadreadhead's Avatar
 
Join Date: Aug 2004
Location: Myrtle Beach, South Carolina
Posts: 2,199
Feedback: 4 / 100%
                     
ahh.thank you for being so knowledgeable
Imadreadhead is offline  
post #13 of 14 (permalink) Old 12-20-2004, 10:31 AM
 
Join Date: Apr 2004
Posts: 931
Feedback: 0 / 0%
                     
i think they are all interchangable physically, you just need to swap the clear plastic piece that goes over the gauges, then of course you have compatibilty issues like airbag and abs lights and such. I dont know if that overlay will fit on the 300m or concorde with the round guages because of the chrome rings, unless you dont mind taking those off.
lbis4123 is offline  
post #14 of 14 (permalink) Old 12-20-2004, 11:28 AM
 
Join Date: May 2002
Posts: 849
Feedback: 0 / 0%
                     
the odometer reset button post is in a different location from Concordes to 300M/LHS/Intrepids. but you can drill a new hole in the cluster hood.
concordia is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Similar Threads
Thread Thread Starter Forum Replies Last Post
2G Engine Will NOT Fit 1G Car Hypnos Project Forum 44 01-04-2006 06:25 PM
Will these dodge magnum rims fit my 98 concorde lxi gizm0815 Performance / Modifications (Second Generation) 4 11-16-2004 03:31 AM
Jenson direct fit car stereo CD player for sale. Green Mosheen Buy / Sell / Trade 4 10-11-2003 01:46 AM
Hawk rear pads don't fit! (too thick) peva Performance / Modifications (Second Generation) 20 10-02-2002 04:56 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome