Looking for 3.3 Turbo cam - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 8 (permalink) Old 10-13-2015, 08:41 PM Thread Starter
Intrepid Newbie
 
Join Date: Oct 2015
Location: Utah
Posts: 4
Feedback: 0 / 0%
 
Looking for 3.3 Turbo cam

My sand rail has a 3.3 that I built heavily with eagle h beam rods and hypereutetic pistons, I dropped the compression to 8.1-1 and running 20psi of boost running alcohol. I need to find a cam that gets rid of the overlap and is more suited to a turbo setup. also any advice on valve springs would be appreciated.
93 3.3 Sand Rail is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 10-13-2015, 08:47 PM Thread Starter
Intrepid Newbie
 
Join Date: Oct 2015
Location: Utah
Posts: 4
Feedback: 0 / 0%
 
sig change
93 3.3 Sand Rail is offline  
post #3 of 8 (permalink) Old 10-13-2015, 09:19 PM
Intrepid Pro
 
EagleESI's Avatar
 
Join Date: Oct 2005
Location: Chatt, TN
Posts: 4,276
Feedback: 3 / 100%
                     
Can Am's used a dual spring setup that Can Am used. Crane Cams told me it would work with the Roller lifters. I'll dig out the info.

Also I know of the only "Turbo" cam ever made for the 3.3. I'll get hat info as well. How much you willing to give for one (has about two hours maybe of time running on it?)
EagleESI is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 10-13-2015, 10:05 PM Thread Starter
Intrepid Newbie
 
Join Date: Oct 2015
Location: Utah
Posts: 4
Feedback: 0 / 0%
 
I am aware of this cam. I talked with you about 2 years ago about it before I figured out all my mods as listed in sig...don't know I never really got the info on it and my account got deleted. so here I am with a lot more mods then I think have been completed on the 3.3 and yes I am very interested in it. well lets start with a 400$ offer on it and negotiate from there.

as far as valve springs please let me know what you can find. I don't want to have a float issue and smack a high dollar piston.
93 3.3 Sand Rail is offline  
post #5 of 8 (permalink) Old 10-14-2015, 09:02 PM
Intrepid Pro
 
EagleESI's Avatar
 
Join Date: Oct 2005
Location: Chatt, TN
Posts: 4,276
Feedback: 3 / 100%
                     
Quote:
Originally Posted by 93 3.3 Sand Rail View Post
I am aware of this cam. I talked with you about 2 years ago about it before I figured out all my mods as listed in sig...don't know I never really got the info on it and my account got deleted. so here I am with a lot more mods then I think have been completed on the 3.3 and yes I am very interested in it. well lets start with a 400$ offer on it and negotiate from there.

as far as valve springs please let me know what you can find. I don't want to have a float issue and smack a high dollar piston.
The Valve Springs the Can Ams use are Crane Cams #99893-2. I know the Shelbys ran up to around 7500 rpms. If they will work I don't know. I also am unaware of the keepers and retainers used on these. I believe the heads were cut to accept these springs however. I can get photos of the Shelby Heads if you want.


Cam Specs far as we know,

Intake & Exhaust
-Lobe ctr sep = 110.9 cam deg
-valve overlap = .5 crank deg

Intake
-Valve opening = .2 BTDC
-Lobe ctr = 108.2 ATDC
-Valve closeure = 39.7 ABDC
-Duration = 219.9 crank deg
-Max cam lift = .31059 in
-Net valvelift = .46589 in
-Lobe area = 23.85 in deg

Exhaust
-Valve opening = 46.2 BBDC
-Lobe ctr = 113.6 BTDC
-Valve closure = .2 ATDC
-Duration = 226.4 crank deg
-Max cam lift = .3176 in
-Net valvelift = .4764 in
-Lobe area = 24.97 in deg



Dave Says $250 for the Cam, and the lifters that it came with. And also wanted me to offer that he has a NOS 4.0 Crank if you wanted some more power.


Last edited by EagleESI; 10-14-2015 at 09:25 PM.
EagleESI is offline  
post #6 of 8 (permalink) Old 10-15-2015, 01:10 PM Thread Starter
Intrepid Newbie
 
Join Date: Oct 2015
Location: Utah
Posts: 4
Feedback: 0 / 0%
 
Sweet how do I get ahold of him or get the ball rolling? As far as the crack is it a 4.0 stroker? I think I'm getin close to the limit of the trans so now I'm looking to fix some hiccups caused by the stock cam get the fueling right and maybe get it to spool a little sooner but I don't Wana risk throwing a buch more power at it and my rods and pistons are already setup for the 3.3 crank
93 3.3 Sand Rail is offline  
post #7 of 8 (permalink) Old 10-15-2015, 11:15 PM
Intrepid Pro
 
EagleESI's Avatar
 
Join Date: Oct 2005
Location: Chatt, TN
Posts: 4,276
Feedback: 3 / 100%
                     
sent you a PM
EagleESI is offline  
post #8 of 8 (permalink) Old 02-11-2016, 09:44 PM
Intrepid Newbie
 
Join Date: Nov 2015
Location: Kansas City, MO
Posts: 13
Feedback: 0 / 0%
 
I know this post is old, but could you post what parts you are using in your engine? I'm curios about the compression and your piston setup. What was the pistons and rods you were using?

Thanks!

Also, do you have a video of it?
WarlockSyno is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome