New pics! - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 10 (permalink) Old 03-13-2004, 11:05 PM Thread Starter
 
Join Date: Nov 2003
Posts: 952
Feedback: 0 / 0%
 
New pics!

After the trip to Rhode Island, she is pretty dirty, so please look passed that. These are pics of the inside, mostly (since I had to clean that up)... All I really did was throw stuff out of the rear and trunk and organise neatly..... Oh yes... I think I might need to buy new hydrolic things for the hood.... Because I'm currently holding up the hood with a block of wood!
------

Check out that wide open mouth and she's catchin a nice breeze too!
------







------

Oh, look, the engine bay! .... Very dirty :(
------



------
It's the side interior shots!
------






(the spare is out in the open because I came upon a flat tire... further inspection says these tires... are bald.. So I replaced them... and while replacing them, it came to my attention the rotors were NASTY.. I mean, rust came chipping off - so I bought new rotors.. Come to find out, my rotors were straight from the assembly line - they lasted 104K miles/9 years! )




















And there ya have it.. this morning was filled with vaccuming and cleaning out the intrepid! Next thing on the to-do list? WASH AND WAX!
FirespiritES is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 03-14-2004, 08:11 AM
DIT
Intrepid Pro
 
DIT's Avatar
 
Join Date: Jul 2003
Location: New Kensington, PA
Posts: 2,333
Feedback: 2 / 100%
                     
I have a piece of wood holding my hood up too. Inside pics looks good. I got some "bull" pics for you too
DIT is offline  
post #3 of 10 (permalink) Old 03-14-2004, 10:03 AM
Intrepid Fan
 
WinkeyTooFly's Avatar
 
Join Date: Dec 2003
Location: Orlando
Posts: 130
Feedback: 0 / 0%
 
Hehe yup yup i got me a stick holding up mine too actually the just take the sweeper part of a broom off and the stick works just perfect. If u get new hydrolic lifts there dont get the factor type cuz they will fail sooner or later if anything do a lil modding and get some bigger ones
WinkeyTooFly is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 03-14-2004, 11:10 AM Thread Starter
 
Join Date: Nov 2003
Posts: 952
Feedback: 0 / 0%
 
Awesome!! I can't wait to see em

Check this out - Mom is trying to tell me that I can't mod this car.. Watch me.. ;) hehe
FirespiritES is offline  
post #5 of 10 (permalink) Old 03-14-2004, 12:48 PM
DIT
Intrepid Pro
 
DIT's Avatar
 
Join Date: Jul 2003
Location: New Kensington, PA
Posts: 2,333
Feedback: 2 / 100%
                     
Yeah I need some good ones too mine sucked, hardly used them then when I would they wouldn't hold it for long. lol ash dont get in trouble
DIT is offline  
post #6 of 10 (permalink) Old 03-14-2004, 04:15 PM Thread Starter
 
Join Date: Nov 2003
Posts: 952
Feedback: 0 / 0%
 
Oh don't worry. I won't get into [too much] trouble hehehe. But I am replacing the stock cassette with a stock CD player, so she will be happier (she loves listening to music, however all of her music is in a CD form - and she hates the walkman!) Shouldn't hurt with the trade-in value....
FirespiritES is offline  
post #7 of 10 (permalink) Old 03-14-2004, 09:55 PM
Intrepid Pro
 
FunkRider's Avatar
 
Join Date: Jul 2002
Location: Hamilton Ontario Canada
Posts: 3,498
Feedback: 0 / 0%
                     
I've seen many many many rotors with rust chipping off them etc that were fine.
FunkRider is offline  
post #8 of 10 (permalink) Old 03-15-2004, 01:09 AM Thread Starter
 
Join Date: Nov 2003
Posts: 952
Feedback: 0 / 0%
 
Well, see, my mom had been complaining about grinding in the rear of the car...but i never gave it much attention, because... well, Im not the regular driver of the car! They were due for a change....
FirespiritES is offline  
post #9 of 10 (permalink) Old 03-15-2004, 12:31 PM
Intrepid Pro
 
FunkRider's Avatar
 
Join Date: Jul 2002
Location: Hamilton Ontario Canada
Posts: 3,498
Feedback: 0 / 0%
                     
As long as they wern't changed because of being rusty. ;)
FunkRider is offline  
post #10 of 10 (permalink) Old 03-15-2004, 03:40 PM Thread Starter
 
Join Date: Nov 2003
Posts: 952
Feedback: 0 / 0%
 
lol, I see your point. It stops a LOT smoother now.. however there is a clunk when turning... comes from the front.... any idea?
FirespiritES is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome