Just got the connect stuff I ordered from ebay. Have a few questions and need some clarifications. First...the roof harness on my car that plugs into the mirror has 5 wires, the cut off end that was sent with the mirror, and I assume I do not use, has 6 wires. Any ideas what the 6th wire is? I thought our stock mirror plug from our roof harnesses were a direct plug n play? My stock mirror is the auto dimming type.
Second, can everyone please look at the included picture and tell me what I am missing please? The partial harness at bottom is the clipped off mirror harness with 6 wires, from the Town & Country this came out of. I am certain the 4 whitish/yellow plugs are for the satellite radio antenna and I will not be using those. I am pretty sure that the square black plug also plugs into the back of the mirror next to there the regular mirror plug is at...it fits the hole. The square GRAY plug in the middle does not fit anything and I can only assume it would have plugged into the satellite radio box, especially with its proximity to the connector ends for the antenna which would have to plug into the same satellite radio box. Again, if it is part of the satellite radio function, I will not be using this. So, this leaves the black and the gray plug receivers on the uconnect unit. What needs to plug into each? I think I am missing he harness that goes from the unit to the radio, can anyone verify this? And that leaves one more hole...what goes there?!
I know this is a lot of questions, and I have tried to be as clear as possible. If anyone knows this if, os has done this install and can break down what I have right and wrong and well as what to do from here, I would be VERY thankful!!!
P.S. The mirror itself looks great and lights up. BUT I need to get everything connected!!! Thank you ahead of time!!!