It would give you the SRV, and MTV valves, which are part of the "HO" function. They would not operate unless the wiring was there and the parameters were set in the PCM.
Assuming you have an 02 or newer car with a 3.5 Magnum engine; you would first have to convert the vacuum operated SRV valve on the 3.2 plenum to the electronically operated one seen on 02+ 3.5 HO engines...so you might as well just get a 3.5HO plenum from 02+.
Along with the 3.2 or 3.5HO plenum, you would need a matched PCM from an HO. This is also providing that the wiring is there to both valves 02-04. If the wiring is not there, it would have to be added, either by making a harness and pinning it to the PCM, or replacing the engine harness with that of an HO equipped car.
Last edited by Daytrepper; 10-11-2016 at 08:18 PM.