Need advice on some upgrades - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 1Likes
  • 1 Post By tf34mech
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 6 (permalink) Old 05-21-2018, 05:48 PM Thread Starter
Intrepid Newbie
 
Join Date: May 2018
Location: Chicago
Posts: 4
Feedback: 0 / 0%
 
Exclamation Need advice on some upgrades

I have a 2000 Intrepid with the 2.7L v6. I was looking to do a few upgrades. I want to

1. Improve the sound of the car by upgrading exhausts possibly to the 300m special exhaust removing the resonator. I want to get the best sound out of the engine
2. make some power by either a supercharger or turbocharger. I know this can get out of hand with all the fabrication but its worth a shot
3. upgrade the computer, remove speed and rev limiters
4. add coilovers to lower the car even more, which i know its already pretty dang low already

one thing id like to do in the future is convert the car into awd.

any advice helps, thanks.

Last edited by 2000Intrepid_iiPainnz; 05-22-2018 at 06:53 PM.
2000Intrepid_iiPainnz is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-23-2018, 04:49 PM
Intrepid Newbie
 
tf34mech's Avatar
 
Join Date: Jan 2013
Location: SW Michigan
Posts: 79
Feedback: 0 / 0%
 
These guys can tune your PCM.

Chrysler Tuning | BG Chrysler

928 Motorsports make universal supercharger brackets for Powerdyne Paxton and others.

https://928motorsports.com/parts/pow...al_bracket.php

Coil overs would probably have to be custom.
cruzcar likes this.
tf34mech is offline  
post #3 of 6 (permalink) Old 05-23-2018, 08:36 PM Thread Starter
Intrepid Newbie
 
Join Date: May 2018
Location: Chicago
Posts: 4
Feedback: 0 / 0%
 
Quote:
Originally Posted by tf34mech View Post
These guys can tune your PCM.

928 Motorsports make universal supercharger brackets for Powerdyne Paxton and others.

Coil overs would probably have to be custom.
I live in Chicago, but ill look at 928 though. Any thoughts on an exhaust system?

(Accidentally double posted)

Last edited by 2000Intrepid_iiPainnz; 05-23-2018 at 08:39 PM. Reason: dp
2000Intrepid_iiPainnz is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 05-23-2018, 08:39 PM Thread Starter
Intrepid Newbie
 
Join Date: May 2018
Location: Chicago
Posts: 4
Feedback: 0 / 0%
 
@tf34mech

I live in Chicago so I wouldnt be able to go down to BG unless I could ship my PCM to them. Any thoughts on an exhaust system?
2000Intrepid_iiPainnz is offline  
post #5 of 6 (permalink) Old 05-23-2018, 09:46 PM
Intrepid Newbie
 
tf34mech's Avatar
 
Join Date: Jan 2013
Location: SW Michigan
Posts: 79
Feedback: 0 / 0%
 
No one seems to make an after cat exhaust system so you're going to have to wing it. Don't go too much higher than stock on the exhaust pipe diameter or you'll lose low end torque. I'm partial to Magnaflow.
tf34mech is offline  
post #6 of 6 (permalink) Old 05-24-2018, 09:03 AM Thread Starter
Intrepid Newbie
 
Join Date: May 2018
Location: Chicago
Posts: 4
Feedback: 0 / 0%
 
Quote:
Originally Posted by tf34mech View Post
No one seems to make an after cat exhaust system so you're going to have to wing it. Don't go too much higher than stock on the exhaust pipe diameter or you'll lose low end torque. I'm partial to Magnaflow.
A lot of people have created a dual exhaust platform, but I am very sure that the 2.7L model doesnt allow for it. What people have been doing is removing the resonator and replacing the mufflers to either magnaflow or Xlerator mufflers. the stock setup right now is resonator going through a cat converter going through one muffler out of a muffler tailpipe.
2000Intrepid_iiPainnz is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome