no turn over - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 8 (permalink) Old 11-23-2011, 02:30 PM Thread Starter
Intrepid Fan
 
meterman001's Avatar
 
Join Date: Sep 2011
Location: weymouth ma.
Posts: 109
Feedback: 0 / 0%
     
Smile no turn over

removed 2.7 installed 3.5 ho will not turn over using key will turn over if jumping starter relay termals will run didnot change out ecm yet wanted to see if it ran first eany body have this problim before this wiring was not disturbed only unpluged ecm
meterman001 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 11-23-2011, 03:02 PM
Garfield Rules
 
95trep3.3's Avatar
 
Join Date: Apr 2003
Location: Summerville, SC
Posts: 9,144
Feedback: 4 / 100%
                     
First off please use punctuation marks. makes it a hell of a lot easier to red your posts. Next does your have a SKIM key?
95trep3.3 is offline  
post #3 of 8 (permalink) Old 11-23-2011, 03:27 PM
I hit shit with sticks!


 
Daytrepper's Avatar
 
Join Date: Jan 2005
Location: Zebulon, NC
Posts: 37,126
Feedback: 21 / 100%
                     
Garage
Check the solenoid power wire at the starter to make sure it is connected all the way. Also check the ASD relay, and all plugs/connectors.

The 2.7 PCM will run the engine just fine, permanently. No need to switch PCMs at all. Only downside is the MTV valve will not be operational, but the performance effect from it is minimal.
Daytrepper is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 11-23-2011, 07:28 PM Thread Starter
Intrepid Fan
 
meterman001's Avatar
 
Join Date: Sep 2011
Location: weymouth ma.
Posts: 109
Feedback: 0 / 0%
     
No skim key no factory antytheft auto starter won't work eather
meterman001 is offline  
post #5 of 8 (permalink) Old 11-23-2011, 08:40 PM
Mopar or No Car
 
D76G12's Avatar
 
Join Date: Nov 2003
Location: KCMo . . . . . . The City of Fountains
Posts: 7,870
Feedback: 1 / 100%
                     
Auto starter? As in after-market? Was that on there before the swap?
D76G12 is offline  
post #6 of 8 (permalink) Old 11-23-2011, 09:31 PM Thread Starter
Intrepid Fan
 
meterman001's Avatar
 
Join Date: Sep 2011
Location: weymouth ma.
Posts: 109
Feedback: 0 / 0%
     
Yes worked Starter conections ok

Last edited by meterman001; 11-24-2011 at 09:02 PM.
meterman001 is offline  
post #7 of 8 (permalink) Old 11-26-2011, 06:46 PM Thread Starter
Intrepid Fan
 
meterman001's Avatar
 
Join Date: Sep 2011
Location: weymouth ma.
Posts: 109
Feedback: 0 / 0%
     
found the problim canot use 3.5 ecm starts shuts off must have skim myne didnot . the problim was one of the plugs on ecm green was not pluged in all set now runs. now i have other problum cat right side to long dumies sent wrong cat gues i will have cut out section to fit
meterman001 is offline  
post #8 of 8 (permalink) Old 11-26-2011, 07:37 PM
Bitches be like...


 
beeblebrox82's Avatar
 
Join Date: Nov 2007
Location: Holland, MI
Posts: 16,618
Feedback: 6 / 100%
                     
Garage
nice to hear it turns over!!
beeblebrox82 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome