Join Date: Nov 2011
Location: Waterloo, ON, Canada
Question about evic display
Hi, probably beating a dead horse here but I have a question.
Got this from another forum poster~ Treppenwolf
Originally Posted by IS300M
In my '04 if you leave the blinker on for too long an indicator comes up on the EVIC that shows via an arrow what indicator is on, ill try and snap a picture some time
Originally Posted by TorontoFireCaptain
To add, similar to IS300M's observation above, the AG models also show the signal, and as well, if the washer fluid is low, it show a little "squirt" on the screen, with a notation, and a chime.
Thanks guys. Great posts! Here are some more alert messages pasted from the 2003 FSM Body Supplement:
EVIC provides the following driver alert messages:
– TURN SIGNAL ON (with vehicle graphic) (As noted By IS300M and TFC)
– PERFORM SERVICE
– DOOR OPEN (individual or multiple doors, with graphic)
– WASHER FLUID LOW (with graphic) (As noted by TFC)
– RKE FOB BATTERY LOW
– LAMP OUT
An audible chime or chimes will accompany any displayed warning messages. Chime requests with an OPEN message are dependent upon vehicle speed.
The EVIC will not display information for any of the screens for which it did not receive the proper PCI bus data.
My question is I only get the Perform service & door alerts nothing else.
Evic I got is 56042749AG Model:Evic 75813
It's installed in an '04 Intrepid using the original harness from the host car. It allows programing features but that's it. Did I grab the wrong one?