So it begins - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 5 (permalink) Old 02-11-2002, 09:17 PM Thread Starter
 
Join Date: Feb 2002
Posts: 19
Feedback: 0 / 0%
 
So it begins

So I've started working on the Trep. Had to start with the small stuff till I figured out where I wanted to go with it. So I removed all the decals but the one from the hood. Just wanted to see if you guys knew if I removed it if it would be a hassled or if it was just like the letters I removed off the back.
Went down to a shop I've been talking to for awhile now about the Trep and ordered a Sweet Looking Spoiler for it. No where near what normal Treps have and I saw a demo unit of it placed on my Trep.....once its done I'll have to get a pic up. Looking into the dual exhaust part but everyone I have contacted said its illegal....so I may wait on that for now. Also anyone have any idea if its possible to put a Ram Air unit on the Trep? With a Nice Hood mod it would do well i think. Later


The One
ForceOne is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 02-11-2002, 09:42 PM
 
Join Date: Jul 2001
Posts: 504
Feedback: 0 / 0%
                     
First, the hood decal was easier than the letters on the back.

Second, why would dual exhaust be illegal? As long as you don't remove the cats, you should be OK.
MadTxn is offline  
post #3 of 5 (permalink) Old 02-12-2002, 11:16 AM
 
Join Date: Nov 2001
Posts: 408
Feedback: 0 / 0%
 
ForceOne, ask for the "Cat-back Dual exhaust" for a 300m. These are legal, and as long as you don't change any of the emmisions devices (egr,pcv,cat) you can make any changes you desire. As far as I know this is true even in Colorado. But don't forget, if you open up the exhaust with a dual cat-back system, you will lose some low-end torque. Make sure you are putting enough air into the engine to make a high flow exhaust worthwhile. I do have some ideas for a "Ram Air" system, but until I actually measure I would hesitate to post (please don't flame me!!!). E-mail me and I'll give you my ideas. Plus if you live close to me, maybe we can work out something together. By the way, what type of spoiler did you get (from who or what car)?

Dave
Reiton is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 02-12-2002, 11:30 AM
 
Join Date: Jun 2001
Posts: 3,503
Feedback: 0 / 0%
                     
Quote:
Originally posted by Reiton:
I do have some ideas for a "Ram Air" system, but until I actually measure I would hesitate to post (please don't flame me!!!).
I'm in the same boat as you are.
Warlord187 is offline  
post #5 of 5 (permalink) Old 02-12-2002, 06:05 PM Thread Starter
 
Join Date: Feb 2002
Posts: 19
Feedback: 0 / 0%
 
Actually I am in the Springs but I have to hit Denver this weekend. I'll be up there till sometime monday. Its a Custom Spoiler from a Company called Auto Trim Design. Also gonna work with him to get some Lettered Decals for my Trep. Not sure what exactly yet but I'm so bored with the whole "Powered by (insert Make here)" thing that I want something different. And putting asian writing on it just seems wrong since its a not a RICER. So i'll figure something out. I'll look into that whole "Cat" system and see what I can find out. I don't know much but the simpler physics of "Ram Air" so I'm not sure how much help I would be but I'm always willing to help. Thanks for the info guys and have a good one.

The One
ForceOne is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome