Join Date: May 2007
Location: Sudbury, Ontario
I actually just finished installing one on my '02 Intrepid last week. I found a used one on Kijiji from a 300M. Reese lists two different p/n's for the M and the Intrepid. The 300M one bolts directly under the rear frame using 2 existing holes and 2 new ones. The Intrepid one bolts up by the rear re-bar and then has some support "arms" coming down to the same 2 existing holes as the M hitch. The main difference with the M hitch was that the receiver actually goes right up against the bumper on my Intrepid. This wouldn't be a problem on an M though. Since my hitch was used, I ended up having to make some plates with bolts tack welded on that were then slipped into the frame. I did this instead of going out and buying new hardware since it was difficult to find. For wiring, you can get all the wires you need on the drivers side, behind the rear wheel well. I installed my hitch to tow a small snowmobile trailer, well under 2000 lbs.
2011 BMW 335xi (e92) - Black Sapphire Metalic w/ Coral Red Interior