Heated Mirrors--- what's needed. - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 12 (permalink) Old 05-01-2013, 06:34 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Heated Mirrors--- what's needed.

well mod bugs got me again... looking to install some heated mirrors from a 300 but just wondering what I need.

04 trep SE I have the 300 seats with memory. Just wondering 2 things...

1. what year donor car should I be looking for... (not interested in the mirror signals)

2 what kind of wiring would I need... I read that I would need to run a wire from the defroster relay in the trunk with a 10A fuse... what else? My car currently has Power mirrors.

Also just wondering if 300 inner door trim would fit on a trep or would I have to do a complete interior change.. mainly I'm after the chrome switches and door handle..I know I can pull out the switches but what about the door handles?

"The Intrepticon" Click Image for Mods & Pics


Last edited by Intrepticon; 05-01-2013 at 06:53 PM.
Intrepticon is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 05-01-2013, 10:42 PM
Bitches be like...


 
beeblebrox82's Avatar
 
Join Date: Nov 2007
Location: Holland, MI
Posts: 16,618
Feedback: 6 / 100%
                     
Garage
I need to do this myself. You'll have to fish a wire through the door, and get the hunk of wiring out of a donor car. there;s an inline fuse somewhere like you say, I haven't gone to a yard to hunt for it yet.
beeblebrox82 is offline  
post #3 of 12 (permalink) Old 05-01-2013, 11:35 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
According to the FSM it's located in the trunk by the antenna (coming off the Rear defroster relay.) As for the door harness was just gonna grab that maybe... but definitely not doing a body harness swap.. too much downtime for the car. Most likely gonna make my own wiring harness from the driver seat module to the passenger and driver sides... Unless I have the wiring already In my body harness.. gonna take a peak in the near future... what about the 300 door trims? do they match with the treps?
Attached Images
File Type: jpg Location.jpg (141.1 KB, 15 views)
File Type: jpg 2000%20FSM%208W-80-8.jpg (129.0 KB, 15 views)
Intrepticon is offline  
Sponsored Links
Advertisement
 
post #4 of 12 (permalink) Old 05-01-2013, 11:37 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
sorry uploaded the wrong pin out...
Attached Images
File Type: jpg Untitled2.jpg (75.8 KB, 12 views)
Intrepticon is offline  
post #5 of 12 (permalink) Old 05-02-2013, 09:24 AM
Intrepid Pro
 
paintballdude05's Avatar
 
Join Date: May 2007
Location: Sudbury, Ontario
Posts: 13,180
Feedback: 13 / 93%
                     
Easiest way, body and door harness swap.

I'd look for 01+ mirrors personally, 02 being the best year.
paintballdude05 is offline  
post #6 of 12 (permalink) Old 05-02-2013, 09:29 AM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Quote:
Originally Posted by paintballdude05 View Post
Easiest way, body and door harness swap.

I'd look for 01+ mirrors personally, 02 being the best year.
Meh I have no quams with running my own wiring... got a good idea on how to run it through the door... as for the mirrors was wondering what year to go for... seems like 01-02 are the best from what I've been reading...

what about the front door trims? are they just swap and go? I know for the rears they have to be modded.. also did you get my pm Paint?
Intrepticon is offline  
post #7 of 12 (permalink) Old 05-02-2013, 09:34 AM
Intrepid Pro
 
paintballdude05's Avatar
 
Join Date: May 2007
Location: Sudbury, Ontario
Posts: 13,180
Feedback: 13 / 93%
                     
Yeah I'm getting to my PM's next...

You can swap handles and switches pretty easily. You can fit front M doors on a trep no problem. But, IRC the passenger side upper panel and dash area don't really line up so it looks weird.

Like I said, 02 is the best, followed by 01 then 03-04.
paintballdude05 is offline  
post #8 of 12 (permalink) Old 05-02-2013, 09:41 AM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
kk I'll just pull the handles and switches...nother pm sent...
Intrepticon is offline  
post #9 of 12 (permalink) Old 05-06-2013, 08:29 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Windshield help! repair or replace?

Well got the new mirrors and got them installed along with the chrome handles... going to hook up the memory & heat on a later day... but in the process was undoing my rear view and slipped wound up taking a chunk out of my windshield... any idea if this can be repaired or do I have to go replace?

The chunk is only missing on the inside.. the outside has no break..
Attached Images
File Type: jpg IMG_0353.jpg (72.6 KB, 19 views)
File Type: jpg IMG_0354.jpg (109.6 KB, 18 views)
File Type: jpg IMG_0355.jpg (69.5 KB, 17 views)
File Type: jpg IMG_0356.jpg (62.6 KB, 17 views)

Last edited by Intrepticon; 05-06-2013 at 08:33 PM.
Intrepticon is offline  
post #10 of 12 (permalink) Old 05-06-2013, 09:43 PM
Bitches be like...


 
beeblebrox82's Avatar
 
Join Date: Nov 2007
Location: Holland, MI
Posts: 16,618
Feedback: 6 / 100%
                     
Garage
that's cracked bad man, it will spread everywhere. Could maybe take it to a glass repair place... but I'm guessing you're in for a new windshield.
beeblebrox82 is offline  
post #11 of 12 (permalink) Old 05-06-2013, 09:48 PM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
it's not a crack though lol it's an actual chunk... and it didn't go all they way through just in a little ... going to take it in tomorrow... just hoping it can be fixed lol...
Intrepticon is offline  
post #12 of 12 (permalink) Old 05-07-2013, 10:22 AM Thread Starter
Intrepid Pro
 
Intrepticon's Avatar
 
Join Date: Nov 2011
Location: Waterloo, ON, Canada
Posts: 1,391
Feedback: 0 / 0%
                   
Dammit turns out need a new windshield. $302 down the drain lol. But on the bright side got a deal on tinting. $180 instead of $299
Intrepticon is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome