Okay guys, i snagged a pair of side view mirrors, with the run signals. I want to install them in the trep. To be honest i don't really care for all of the features besides the turn signals, and power to move the mirrors. Thats all I want, now I can guess that the power in my trep to my mirrors are probably the same colors. I would like to know how to get power to the mirrors and which wire would be the actual turn signal. I planned on running wires from the mirror to my turn signals in the front to accomplish this.
long story and a tad confusing but all I want is power mirrors, which wires i use from the harness, and well any advice pictures. I can post pictures of what wires I have if that helps.
Btw I plastidiped the mirrors vs getting them painted, pretty cool looking if you ask me.
Last edited by Garrettoleksy; 07-23-2013 at 12:11 AM.
check out the FSMs for the wiring diagrams. The connectors are completely different. I splice on the old connector to the movememnt wires so I could plug those in at the original door harness, then ran the turn signal wires through the door and spliced them in at the PDC.
So when I go to put the wire I am using to make the connection to the turn signal in the front to the turn signal in the mirror I get a whole lot of nothing. Like I am confused do I have to have a fuse in or is there a harness that needs to be plugged in I am confused help please :3