clear turn signals in the front - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 4 (permalink) Old 10-15-2005, 09:42 PM Thread Starter
Join Date: Oct 2005
Posts: 18
Feedback: 0 / 0%
clear turn signals in the front

whats up guys can someone help me with my fron headlights on how to clear the turn signals i dont know how and if there is a way can you help me or is there a place where i can buy them???
bigwe is offline  
Sponsored Links
post #2 of 4 (permalink) Old 10-15-2005, 09:46 PM
Intrepid Pro
Chewievette's Avatar
Join Date: Feb 2004
Location: Grand Rapids, MI
Posts: 3,850
Feedback: 4 / 100%
There's always a way, I just have no idea what it is! Since your car is a 2nd gen you might try asking them, or maybe a mod could just move this thread over there
Chewievette is offline  
post #3 of 4 (permalink) Old 10-15-2005, 10:07 PM
Join Date: Aug 2003
Posts: 2,230
Feedback: 1 / 100%
Well this is the wrong section, but I can help you! There is no place that sells headlights with clear corners, but there is a way to remove the reflector. To do so you must tear the headlights apart. There is a good write-up in the how-to section, by Skuby INC, which will tell you how to tear the headlights apart. Here is a link to that how-to:
Once you have the headlights apart you will need to remove the piece that stays in the cover of the headlight. All of the chrome pieces inside of the headlight assembly scratch VERY easily so be VERY careful. Next you need to drill a small hole in the amber lens where it attaches to the plastic piece. This should cause the reflector to come could also use needle nose pliars to break the reflector and use a dremmel tool to remove the pieces of amber lens that remain on the assembly.
There is another way to do this mod, but I think that this is the best way since you will not need to drill holes into the lens. This way requires you to drill holes where the lens is glued onto the assembly then you use needle pliars to break the lens and remove the pieces through the hole where the turn signal bulb goes. This might be the easiest route because you do not need to take the headlight apart, but it will not look as clean when you are done. Here is a how to by Slewis which will show you how to clear your corners without tearing apart the headlights:

Hope this helps you!
qp_20 is offline  
Sponsored Links
post #4 of 4 (permalink) Old 10-16-2005, 12:03 PM
Join Date: Jan 2003
Posts: 1,649
Feedback: 0 / 0%
             sells clear turn signal housings for the front for 1st gens for about $50 w/shipping.
Jer_BEAR_bluez is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:

Similar Threads
Thread Thread Starter Forum Replies Last Post
Custom Mirror Turn signals LHS Chrysler Concorde, LHS, and Eagle Vision 1 04-12-2005 01:49 AM
Turn Signals Keep Shutting Off idlyttle General Discussion (First Generation) 0 04-06-2004 07:34 PM
Fast Blink Turn Signals Nebulous Performance / Modifications (First Generation) 9 03-20-2004 04:24 PM
turn signals ximkolo General Discussion (First Generation) 11 05-21-2003 12:41 PM
3M protective clear film for front ends CiscoKid General Discussion 2 01-28-2002 10:21 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome