2 into 1!! - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 8 (permalink) Old 02-04-2014, 06:40 PM Thread Starter
Intrepid Newbie
 
knightmoves's Avatar
 
Join Date: Jul 2013
Location: Unionville
Posts: 16
Feedback: 0 / 0%
 
2 into 1!!

Ok before I start I HAVE bought the 2.7 to 3.5 guide to do a swap! BUT Here is my questions. have a 2002 intrepid and a 2001 300. the intrepid has the old dead 2.7. the 300 has a dead trans!! SO I want to swap the 3.5 from the 300 to the intrepid. the main thing I am wondering is will the harness from the 01 300 work with the 02 dash harness from the intrepid? Any one got a set of wiring schismatics? I am just thinking that with 2 complete cars I should be able to do just about any thing to make my Intrepid road worthy again!!! And please be nice guys! I am a noob here!!!LOL
knightmoves is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 02-04-2014, 07:44 PM
Intrepid Pro
 
Join Date: Feb 2002
Location: Virginia, U.S.
Posts: 16,054
Feedback: 4 / 83%
                     
It sounds like you're thinking along the right lines on the harnesses (i.e., you understand that there are major electrical differences between '01 and '02). The complete wiring schematics are in the FSM's.
peva is offline  
post #3 of 8 (permalink) Old 02-04-2014, 11:18 PM
Intrepid Pro
 
bh1992's Avatar
 
Join Date: Jun 2011
Location: Osceola, IA
Posts: 6,302
Feedback: 1 / 100%
                     
Garage
also worth noting that he would have to swap out the ecm, skim module, and have the sentry key from the 300M due to the difference in the tone wheel on the camshaft and flexplate due to the differences in model year.
bh1992 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 02-04-2014, 11:48 PM
Intrepid Pro
 
YesImLDS's Avatar
 
Join Date: Mar 2012
Location: Columbia, Missouri
Posts: 2,757
Feedback: 1 / 100%
           
It might just be easier to swap the transmissions out. Unless you have already swapped out most of the interior from the 300m to the intrepid. Really up to what you want I suppose.
YesImLDS is offline  
post #5 of 8 (permalink) Old 02-05-2014, 05:33 AM Thread Starter
Intrepid Newbie
 
knightmoves's Avatar
 
Join Date: Jul 2013
Location: Unionville
Posts: 16
Feedback: 0 / 0%
 
Well I really don't like the look of the 300. I have my heart set on the intrepid. so I would swap in the leather interior and all. If it is needed to do it I might just go ahead and swap out the dash too it it HAS to be done.
knightmoves is offline  
post #6 of 8 (permalink) Old 02-05-2014, 11:37 AM
Intrepid Pro
 
YesImLDS's Avatar
 
Join Date: Mar 2012
Location: Columbia, Missouri
Posts: 2,757
Feedback: 1 / 100%
           
Quote:
Originally Posted by knightmoves View Post
Well I really don't like the look of the 300. I have my heart set on the intrepid. so I would swap in the leather interior and all. If it is needed to do it I might just go ahead and swap out the dash too it it HAS to be done.
Make a frankenstein 300m into an intrepid! Ha. what you are trying to have done is possible. Someone will shed some more light onto it.
YesImLDS is offline  
post #7 of 8 (permalink) Old 02-05-2014, 11:55 AM
tgs
Intrepid Pro
 
Join Date: Aug 2006
Location: Stuck in Indianapolis until the end of time
Posts: 1,868
Feedback: 3 / 100%
                     
If you want to change the wiring harness, you would need to change everything:
Engine harness
Body harness
Harness from each door
Trunk harness
Instrument Cluster
TCM, PCM, BCM, skim lock and key.
If you do not change the door locks, you will end up with two keys
When you change the BCM you will inherit the mileage from the 300 (which could be good)
Also consider the 300 probably has ABS and the Trep does not so, you will end up with an ABS light.
tgs is offline  
post #8 of 8 (permalink) Old 02-05-2014, 12:17 PM
Bitches be like...


 
beeblebrox82's Avatar
 
Join Date: Nov 2007
Location: Holland, MI
Posts: 16,618
Feedback: 6 / 100%
                     
Garage
2001 and 2002 are very different in the engine bay.TCM/ECM vs PCM and much more. Not friendly years to swap.

I would turn the whole car to 2001, swap in that sexxy 300M interior and be done with it.
beeblebrox82 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome