300M-Clock! - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 9 (permalink) Old 01-29-2007, 04:04 PM Thread Starter
 
Join Date: Jan 2004
Posts: 4,544
Feedback: 3 / 100%
                     
Smile 300M-Clock!

How would I go about in tying in a 300M Clock in to my 2000 "ES" Dashboard?, Is this part of a harness?,or can I just splice and Tap into the radio's wires etc...?, Justw anted to know guys!, thanks Much!


Luroc
luisa is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 01-29-2007, 06:11 PM
Intrepid Modder
 
Gigamight's Avatar
 
Join Date: Aug 2005
Location: Akron, OH
Posts: 972
Feedback: 12 / 100%
                     
are you asking about just providing power? Or are you wondering about installing?

If you just want power, then all you need to do is splice into the existing harness. I think if I remember right there's a pink, a black/green, and an orange. They are (in that order), power, ground, and panel lighting circuit.
Gigamight is offline  
post #3 of 9 (permalink) Old 01-29-2007, 07:33 PM
Intrepid Pro
 
Join Date: Aug 2003
Location: Montreal (Quebec), Canada
Posts: 3,718
Feedback: 4 / 100%
                     
Ask TFC, he was able to install one on an intrepid dash where the center vents are....I tried to find the thread and can't find it....Looked nice to me.
Bimmer_2002 is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 01-29-2007, 07:35 PM
Intrepid Pro
 
Gorm's Avatar
 
Join Date: Jan 2003
Location: Iowa
Posts: 7,101
Feedback: 20 / 100%
                     
He was, but I beleive thats after he swapped his old harness for a 300 harness...so the connector was right there.

--Gorm
Gorm is offline  
post #5 of 9 (permalink) Old 01-30-2007, 09:51 AM Thread Starter
 
Join Date: Jan 2004
Posts: 4,544
Feedback: 3 / 100%
                     
I want 2 power 1 one up, and dim it out when needed to, what wires go where?
luisa is offline  
post #6 of 9 (permalink) Old 01-30-2007, 10:30 AM
Intrepid Modder
 
Gigamight's Avatar
 
Join Date: Aug 2005
Location: Akron, OH
Posts: 972
Feedback: 12 / 100%
                     
Quote:
Originally Posted by luisa
I want 2 power 1 one up, and dim it out when needed to, what wires go where?
It was easy when I did it last time, I had the dash out, so i was able to just pull apart the harness and find the right wire colors and match them up. If that is not an option for you, you may need to run the wires to the BCM to get easier access to them. Send me a PM with your situation if it's a secret mod, and I will write you up instructions.
Gigamight is offline  
post #7 of 9 (permalink) Old 01-30-2007, 10:45 AM Thread Starter
 
Join Date: Jan 2004
Posts: 4,544
Feedback: 3 / 100%
                     
ok thanks pal!, ;), oh are there any specialty 3ooM clock faces around that have the words "ES" around?, or "Intrepid"?, just curious!,
luisa is offline  
post #8 of 9 (permalink) Old 01-30-2007, 10:49 AM
Intrepid Modder
 
Gigamight's Avatar
 
Join Date: Aug 2005
Location: Akron, OH
Posts: 972
Feedback: 12 / 100%
                     
Quote:
Originally Posted by luisa
ok thanks pal!, ;), oh are there any specialty 3ooM clock faces around that have the words "ES" around?, or "Intrepid"?, just curious!,
There is a member here who makes them for the 300m club members. I am forgetting his name right now, it'll come to me. What he makes is a transparent overlay that goes over the clock face. It looks pretty good IMO.

Gorm, you know who I'm talking about, what is his name?

***EDIT***

I think it's Grayslater.

Last edited by Gigamight; 01-30-2007 at 10:57 AM.
Gigamight is offline  
post #9 of 9 (permalink) Old 01-30-2007, 10:58 AM Thread Starter
 
Join Date: Jan 2004
Posts: 4,544
Feedback: 3 / 100%
                     
dat would kool, thanks much!
luisa is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome