Just a thought, you might want to tighten them up a little. That way the TREP will light up with the back up light.
Since you are redoing the Bar (LED project) I would make the back up part light red when in park and driving, and then light up white when in reverse. That way the light serves dual fuctions. You can do it by installing red as well as white LED's. Another thing I would do is have some of the LED's in the light bar connected to the turn signals so that part of the bar would work with the trun signals, how much would depend on you. Since I am on a roll here, you can add the center bar to your brake lights too, that way the whole bar would act as a third brake light. you would need some resistors (for parking lights, and some diodes to control functions.). I better stop before I put a trep rear end on my 300M.
I did this on my 300M lights (the top turn signal was changed to parking/brake/driving light, the center backup was changed to turn/backup light, and the bottom 3 are brake/park/driving). It give a great show when giving a turn signal while in reverse.
Last edited by 300Michael; 02-17-2007 at 08:35 AM.