Join Date: Apr 2004
Location: Whitby, Ontario
The top and bottm door trim panel pieces are heat welded together by means of a bunch of pegs-through-holes.
You can easily separate them by using a 1/2" spade (wood) bit to carefully cut the melted piece on the inside.
Once you add you covering, you can put them back together by re-inserting the (cut off) pegs back jn the holes, then using a soldering gun, remelt the pieces together, using some scrap plastic as a filler/bonding agent.
Once you are done, to ensure a strong joimt, since the pegs are no longer as strong as originally, run a good amound of hot melt glue along the inside seam as a strengthener.
goal - have one of my parts on every DI car:biggrinfl
Honoured to be January 2007 COTM.THANK YOU ALL.