new intrepid owner - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 7 (permalink) Old 12-27-2003, 10:30 PM Thread Starter
 
Join Date: Nov 2003
Posts: 21
Feedback: 0 / 0%
 
new intrepid owner

just picked up our intrepid yesterday. It's a 2000 Intrepis ES with the 3.2 engine. Just love the looks of this car. I hope it runs a long time for me. I will have to do some tlc on it, the door gaskets have shrunk, so I will have to reposition them and I am going to glue them in place. Also the drivers window isn't working properly, I don't know if it is just off the track or if something is broken. I got it pretty reasonable and I knew these things were bad so I have some work ahead of me. Also the auxillary cooling fan is seized, the one that comes on with the A/C. My 96 Caravan had the same problem and I replaced that with an aftermarket fan ,. much cheaper and works good. This is a good forum, lots of good info on here. It gave me a lot of pointers on what to look for when I was shopping for a car. Good job everybody.
royben is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 12-28-2003, 08:48 AM
Intrepid Pro
 
dabirdzR/T's Avatar
 
Join Date: Jul 2002
Location: Myerstown, PA.
Posts: 6,788
Feedback: 7 / 100%
                     
welcome to the site and enjoy, there are many knowledgable people. again welcome and enjoy!!!!!
dabirdzR/T is offline  
post #3 of 7 (permalink) Old 12-28-2003, 09:00 AM
Intrepid Pro
 
Gaze's Avatar
 
Join Date: Jan 2003
Location: South Jersey
Posts: 6,362
Feedback: 8 / 100%
                     
sounds like youve got a nice little project ahead of you there... Im sure you'll find all the answers and support you need on the boards, welcome!
Gaze is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 12-28-2003, 10:19 AM
 
Join Date: Apr 2002
Posts: 5,763
Feedback: 11 / 100%
                     
Welcome to the site.
If your door seals shrunk quite a bit I would go to the wreckers and buy one seal, cut a section slightly bigger than you need and add it to yours. Your seal is a one piece seal but you can cut it, the last few years of Intrepids all had a cut seal.
YB Normyl is offline  
post #5 of 7 (permalink) Old 12-28-2003, 12:41 PM
Intrepid Pro
 
Ravin's Avatar
 
Join Date: May 2002
Location: Maine
Posts: 4,288
Feedback: 0 / 0%
                     
welcome to the boards......hope you enjoy it.
Ravin is offline  
post #6 of 7 (permalink) Old 12-28-2003, 10:31 PM
DIT
Intrepid Pro
 
DIT's Avatar
 
Join Date: Jul 2003
Location: New Kensington, PA
Posts: 2,333
Feedback: 2 / 100%
                     
Welcome to the site
DIT is offline  
post #7 of 7 (permalink) Old 12-28-2003, 10:37 PM Thread Starter
 
Join Date: Nov 2003
Posts: 21
Feedback: 0 / 0%
 
Well, I worked on the door gaskets today and got them back in place. It wasn't as hard as I thought is was going to be the door gaskets were split at the bottom so I could just slide them back up and in place. I glued them now so hopefully that will help. I also used armorall so maybe they won't shrink so fast. I also noticed the drivers window doesn't go up all the way. It stopped just as it started to touch the weatherstripping on top. I took the door panel off and did some adjusting and got it too about a 1/4 inch from the top now which is better but i am still worried it will leak in the rain. Well gotta run.
Royben
royben is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome