Does Anyone have a 1000 OHM resister? - DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 7 (permalink) Old 10-15-2004, 10:02 PM Thread Starter
Intrepid Pro
 
Gorm's Avatar
 
Join Date: Jan 2003
Location: Iowa
Posts: 7,101
Feedback: 20 / 100%
                     
Does Anyone have a 1000 OHM resister?

I am in need a of 500-1000 ohm resister to charge my Capacitor with. Would anyone who is coming to the meet have one, or something like that they could bring?

I know this is kinda late notice.

Thanks!

--Gorm
Gorm is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 10-16-2004, 02:12 AM
Intrepid Pro
 
DjPiLL's Avatar
 
Join Date: Jun 2001
Location: New York City
Posts: 4,739
Feedback: 1 / 100%
                     
Why not get one at Radio Shack?
DjPiLL is offline  
post #3 of 7 (permalink) Old 10-16-2004, 02:19 AM Thread Starter
Intrepid Pro
 
Gorm's Avatar
 
Join Date: Jan 2003
Location: Iowa
Posts: 7,101
Feedback: 20 / 100%
                     
Never mind, I just got the thing to work.

Thanks anyways,

So Rich...you going to be there tomorrow?

--Gorm
Gorm is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 10-16-2004, 03:11 AM
Intrepid Pro
 
LOUD02Special's Avatar
 
Join Date: Mar 2003
Location: Smithfield, RI
Posts: 6,100
Feedback: 2 / 100%
                     
or you could just use a wire tester with a light bulb in it, works just as good.
LOUD02Special is offline  
post #5 of 7 (permalink) Old 10-16-2004, 11:13 PM
Intrepid Modder
 
Join Date: May 2004
Location: Massachusetts
Posts: 353
Feedback: 0 / 0%
                     
Hi, Gorm,

Hope you are enjoying - and using - the light taupe 300M Special seat belts.

You did an excellent post on how to wire heated seats. I must be slow/dense, because I can't follow the instructions! Also, the instructions are different from those sent to me by Torontofirecaptian, but he's got a 2002 car. If I recall, you have a 1999, which should be pretty much the same as my 2000.

I have a 2000 Intrepid ES with all options except traction control. I put in the 300M Special seats (from a 2003, I think) with side airbags. I got a wiring harness thanks to Torontofirecaptain. I've hooked up the passenger white conector to the passenger seat, ran the harness under the carpet to the driver side and hooked up the larger white plug from the harness to the white plug from the seat. There's a spaghetti maze of wires which Torontofirecaptain taped up and told me not to worry about as they're for the heated/memory mirrors.

I know that the seat motors have their own plugs, which I've hooked up and the motors all work correctly (as does the memory function).
There are two thicker wires (if I recall correctly purple with a black stripe and black) which I think are for power and ground for the heat.

Your post said:
"Purple/ Yellow Stripe ----BCM: Connector C4, Cavity 9.
Dark Blue/ White Stripe ----Fuse Box: Cavity 7, Connector 7.
Black/ white Stripe ----Ground
Red/ Tan Stripe ----To Battery with Inline 20 Amp Fuse."

I assume that I look for the Violet/Yel and DB/White wires in the harness that connects the two seats, and I run connectors from these wires to the C4 connector and the fuse box?

How do you know which is cavity 9 on C4? C4 is just aboiut inaccessible in my car, jammed under a heater duct. Are the different terminals numbered? Could I just look for a specific color wire?

Could you tell me (I apologize for being so slow) how you hook up the DB/White wire to the fuse box? Where - physically - is cavity 7, connector 7? The fuse box holds all the fuses. Do you just tap into the front of the box where fuse 7 is located with a small terminal?

Gorm, if you can take the time to walk me through this, I'll be forever grateful.

Best regards,

Richard
rpgoodkin is offline  
post #6 of 7 (permalink) Old 10-17-2004, 01:21 PM Thread Starter
Intrepid Pro
 
Gorm's Avatar
 
Join Date: Jan 2003
Location: Iowa
Posts: 7,101
Feedback: 20 / 100%
                     
GOSH NO.

I should really edit that...because thats not right. I beleive I changed that in a later post, I have to run out here really quick to run some errends, but when I return I will make a how too on this quickly for everyone.

--Gorm
Gorm is offline  
post #7 of 7 (permalink) Old 10-20-2004, 01:21 PM
Intrepid Modder
 
Join Date: May 2004
Location: Massachusetts
Posts: 353
Feedback: 0 / 0%
                     
Gorm,

HELP!!!

Thanks,

Richard
rpgoodkin is offline  
Sponsored Links
Advertisement
 
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Member names may only be composed of alpha-numeric characters. (A-Z and 0-9)

!!ATTENTION ADVERTISERS!! If you intend on advertising anything on this forum, whatsoever, you are required to first contact us here . Additionaly, we do NOT allow BUSINESS NAMES unless you are an Authorized Vendor. If you own a business, and want to do sales on this site via posting or private message, you will need to follow the rules. Shops, Stores, Distributors, Group Buys without being authorized will see your account terminated.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Similar Threads
Thread Thread Starter Forum Replies Last Post
8 ohm subs joe_mn Car Audio and Video 10 08-23-2004 06:05 PM
How's this setup? StunnaOn20s Car Audio and Video 40 07-07-2004 09:57 PM
sealed 2 ohm IDQ10" VS. ported 4 ohm Kenwood 12" punk_32 Car Audio and Video 6 06-30-2004 11:40 AM
OHM Ratings blkbute Car Audio and Video 5 02-01-2003 01:05 AM
Ohm loads blkbute Car Audio and Video 18 11-12-2002 11:26 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome