|Topic Review (Newest First)|
|04-08-2019 02:13 AM|
|//Interceptor//ES//||Thankyou all for the warm welcome|
|04-08-2019 01:48 AM|
|04-07-2019 09:09 AM|
Nice build - keep us updated.
|04-07-2019 04:56 AM|
|peva||I hope the bottom end can take the stress.|
|04-07-2019 12:43 AM|
|//Interceptor//ES//||Thankyou both for the welcome, yeah I tried doing some research for awhile and found very little to no info on a SC LH platform intrepid and I missed my T-bird supercoupe so I decided to build a replacement. Some of the inspiration is from a SC m90 300m youtube vid I found. My car should be finished up over the summer, Ill be posting more pics and vid too|
|04-07-2019 12:04 AM|
|KxWarrior||Holy....Don't see stuff like this everyday! Welcome!|
|04-06-2019 11:59 PM|
|//Interceptor//ES//||I haven't done a WOT run from a dig with the charger on yet, I have dropped from 3rd to 2nd goosed the throttle for a couple secs and the torque has noticeably increased and the blower whine is fantastic but I can feel the motor starving for fuel almost instantaneously as well. This is not my daily so she's garaged until I get the supporting fuel and tuning parts. Also I will be modding the hood to fit the blower the snout sits about 3-4 inches higher than the hood, no worries though I'll make it work|
|04-06-2019 10:03 PM|
Welcome to the site!
How is the performance compared to stock with the charger installed?
|04-06-2019 09:07 PM|
Hi all, newb to the forum but not to Ih platform. Current ride is a 01 es, have had it for 16yrs now mods include 3.2 swap, full special suspension, special exhaust, 2.7 autostick trans & gears, northstar elbow, ported LIM, ported Tb, split port injectors, newer gen coils (3.5 charger), special 150 speedo, special aero kit (side skirts and rear only), special side mirrors. Currently finishing up the SC kit I went with a gtp m90 I think it's the 2nd gen it has Teflon rotors, ported inlet and outlet mounted to a custom aluminum intake adapter. Fuel and tuning is next for this setup, car runs and drives with the blower but high idle and way too lean. My fuel and tuning will be 2 widebands, apexi safc2 or split second piggyback, universal 255 walbro, boost reference fpr and boost gauge. I don't plan to run more than 8lbs at most when done. with the porting and stock gtp pulley I don't think it will run more than 5lbs, at 8lbs I plan to run a water meth kit, attaching pics hope they are visible