DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat

-   General Discussion (https://www.dodgeintrepid.net/10-general-discussion/)
-   -   Needed: all intrepid guru's please (https://www.dodgeintrepid.net/10-general-discussion/221898-needed-all-intrepid-gurus-please.html)

winkler91 02-26-2012 01:25 PM

Needed: all intrepid guru's please
 
Ok so for my scan tool to correctly work I need some specs that I can't seem to find so everyone's help would be greatly appreciated, thanks in advance

So I need the following:
engine displacement.... Would that be the 3.3?
Fuel capacity
MAF PID
MAP PID
Final drive ratio
Wheel circumference
Drag coefficient
Max RPM
Min RPM
Frontal area
Shift point (RPM)
Tire rolling resistance coefficient

Like I said all this info is highly important in getting my fuel specs and HP power and some other points to get the most accurate info for the tool to work correctly

Duds 02-26-2012 04:46 PM

1 Attachment(s)
Are you using DashCommand software?

winkler91 02-26-2012 04:52 PM

Quote:

Originally Posted by Duds (Post 1951124)
Are you using DashCommand software?

Yes sir I am

Duds 02-26-2012 04:53 PM

1 Attachment(s)
So I need the following:
engine displacement.... Would that be the 3.3? / yes, 3300
Fuel capacity /17gal
MAF PID / we don't use it
MAP PID / set by dongle when vehicle identified through ECM.
Final drive ratio / whatever gears you have. Probably 389
Wheel circumference / 16
Drag coefficient .299
Max RPM / 6800
Min RPM / 700
Frontal area / 23.9 sq ft IIRC
Shift point (RPM) / n/a on automatic trans.
Tire rolling resistance coefficient / depends on tire used

If using DashCommand software and talking to Palmer engineers, not possible on the LH to track accurately fuel usage. Use for trending purposes only.

winkler91 02-26-2012 05:46 PM

Quote:

Originally Posted by Duds (Post 1951126)
So I need the following:
engine displacement.... Would that be the 3.3? / yes, 3300
Fuel capacity /17gal
MAF PID / we don't use it
MAP PID / set by dongle when vehicle identified through ECM.
Final drive ratio / whatever gears you have. Probably 389
Wheel circumference / 16
Drag coefficient .299
Max RPM / 6800
Min RPM / 700
Frontal area / 23.9 sq ft IIRC
Shift point (RPM) / n/a on automatic trans.
Tire rolling resistance coefficient / depends on tire used

If using DashCommand software and talking to Palmer engineers, not possible on the LH to track accurately fuel usage. Use for trending purposes only.

I have 225/60/16s on it

winkler91 02-26-2012 05:53 PM

Quote:

Originally Posted by winkler91 (Post 1951136)
I have 225/60/16s on it

And they are BF Goodrich Advantage T/A's

fullmoon97 02-26-2012 06:02 PM

doug i dont think he has the 3.89 gears. i know i dont have them and i think those are the 2nd gen only.

Duds 02-26-2012 06:07 PM

1 Attachment(s)
0.010 to 0.015
Ordinary car tires on concrete

Duds 02-26-2012 06:08 PM

1 Attachment(s)
So 1st gen .360 gears?

winkler91 02-26-2012 06:17 PM

Quote:

Originally Posted by fullmoon97 (Post 1951140)
doug i dont think he has the 3.89 gears. i know i dont have them and i think those are the 2nd gen only.

Quote:

Originally Posted by Duds (Post 1951142)
So 1st gen .360 gears?

Thanks Dan for helpin him out and I screwed up the gear ratio thing...... I'm supposed to put the ratio for each forward gear I guess lol

fullmoon97 02-26-2012 06:29 PM

i think it is 360. but i know the 3.89 aren't in the 1st gen.

cdmccul 02-27-2012 12:01 AM

All first gen from the factory are 3.66. Only cars that have the 2.7 tranny swap carry the 3.89 years (or other swap getting the 3.89 ratio - but not originally 3.89).


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome