DodgeIntrepid.Net Forums banner


  1. Performance / Modifications (First Generation)
    Ok guys i broke down and decided to make a true cold air intake today. I figured since not many people do the true cold air intake, and there are how to's on how to do it i figured i'd post my way of doing it. It was alot like phuckin' phil's way but a bit different. I think phil had a OBD I...
  2. General Discussion (First Generation)
    as you can see i have as far from the engine as possible, but it keeps getting too hot, what should i do?
  3. Buy / Sell / Trade
  4. Performance / Modifications (First Generation)
    i was readin that i can install a 95 civic cai on a 95 3.3l intrepid which one should i get newcomer please be specific about parts and which ones to get thanks 1992-1995 Honda Civic - Vibrant Cold Air Intake - Streetflow - Polished Stainless Steel 1992-1995 Honda Civic - K&N Cold Air Intake...
  5. Performance / Modifications (Second Generation)
    Ok I am looking for a cold air intake for my 02 trep 3.5 and have had no luck finding what I want, I want a K&N kit but i am looking for something with a bit more show quality, does any one know of any kits that will fit on my trep that is chromed, and i will just put a unervisal k&N filter onto...
  6. Buy / Sell / Trade
  7. Performance / Modifications (First Generation)
    Filter blocked completely from all heat by a half inch layer of plastic layered styrofoam and a quarter inch thick layer of rubber.
  8. General Discussion
    im all nervous now my cai will suck in water. how likely do you guys think it would be? its not in a position to be submerged unless it flooded really bad here. but it is in a position to get a little wet from rainwater being slung up from the tires into the engine bay... im almost tempted to...
  9. General Discussion
    k&n cai help so i installed a cai this afternoon. all went well except for a hole i need to drill to bolt down one side of the heat shield... i need to borrow a friends drill... anyhoo i noticed a few things 1. i never tried revving it really high until today. i guess i revved it once or twice...
  10. Performance / Modifications (Second Generation)
    I was wondering around the store the other day getting some stuff for the car and noticed the cone assembly that fits on the end of the CAI sitting all alone. Talking with a couple friends who are really into the lighter weight cars and trucks they have said that fitting the cone onto the...
  11. Performance / Modifications (Second Generation)
    Just doing some EBay shopping and found these bad boys: I haven't seen anyone use them yet, just wondering. One another note, didn't want to...
  12. General Discussion
    I hope this turns into a poll I have no idea how to do it, but let me know if you have to choose between the two, do a cai and exhaust or front infinity components with a infinity amp.
  13. Performance / Modifications (Second Generation)
    thanks to i beata firebird ina es for helping for the last 5 hours. and here are the results. the increase in performance is vary noticeable, i havent driven enough to notice any increase in MPG. and thank you autozone for over chargeing me for the low quiltey plastic parts.
  14. General Discussion (Second Generation)
    I work at autozone and today is the last day for 30% off for employees. I wanna get everything i need to setup a CAI. Its a 99 trep with a 3.5. Anyone have this setup or know what angles and bends i will need? any pictures? thanks a lot
  15. Performance / Modifications (Second Generation)
    I've seen people ask about some CAI's but I haven't seen this one yet. How does this one look? I'm looking to get one for Christmas :)
  16. Performance / Modifications (Second Generation)
    Hi, Want to put a cold air intake on the 98 Trep I just bought this week... Searching around the forum, I found a post talking about putting the K & N FIPK on a 3.2L. On K&N's site, they don't list one for the 3.2. Weird... You guys said to just get the one for the 3.5. Aparently, they are...
  17. Performance / Modifications (Second Generation)
    Ok, I have a noob question here about CAI...If the filter is still under the hood as most setups that I have seen posted here are, and there is no vent or scoop cut into the hood to allow outside air to hit the intake, and the intake is just drawing air in from under the hood, how is it...
  18. Performance / Modifications (First Generation)
    I have a 96 Chrysler LHS, and some money to put into it. I have a list of small things I want to do to it... and I'm really interested in putting in a cold air intake. I was thinking of having the body shop cut right under the license plate on this LHS...
  19. Performance / Modifications (Second Generation)
    Consider this; you call it a cold air kit right? The factory air box actually draws air in from outside the engine compartment; truelly a 'cold air intake' in my mind. Some guys install an aftermarket kit that draws its air from the engine compartment; hmmmm. Please understand I am not being...
  20. Performance / Modifications (First Generation)
    I am gonna be getting a CIA kit today and possibly installing it as well. Its one of the spectre type kits and was wondering if there are any aftermarket heatshields that anyone would recommend to reduce the occurance of possible heatsoak from the air in the engine compartment.