DodgeIntrepid.Net Forums banner
1 - 5 of 24 Posts

· Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
I have had quite a bit of mods done to my trepid, throttle bodys, air restrictor yanked, high performance air intake, prototype sway bar, I have the performance and handling package, the stats say it should pull a 8.3 0-60 but I could never get it that low. car has 106 thou on mileage.
Any ideas?
 

· Registered
Joined
·
79 Posts
Discussion Starter · #4 ·
I didnt have enough time today because I had to work most of the day, but we'll see what happens tommorrow, I'll try and run it at a stop light and see what I'll pull. I got a couple of other problems, I got a good 100-300 pounds in the trunk from the added weight of my system, 3 amps, 2 12's, custom box so that might be a problem.
 

· Registered
Joined
·
79 Posts
Discussion Starter · #9 ·
That makes sense now that the speedo could be slow, hmm well how could I get an accurate reading of what it will pull without spending alot of money? It has really good mid torque pull and top end. I wish superchips carried a chip for the 95 and up modeled 1st gen'z!
 

· Registered
Joined
·
79 Posts
Discussion Starter · #21 ·
Hey Scott,
You say you are runnin a 7.7 0-60 time? Damn and only restrictor removed. What year is your intrep, and how much is that g-tech you are talking about, any sites where I can check it out. I'm curious if my intrepid is pulling that time with what I have done to it.
 

· Registered
Joined
·
79 Posts
Discussion Starter · #23 ·
Thanks alot Scott, I'm defintaly interested and I will purchase one soon. I like the fact of having one because its not one car limited. I can use it with any car so that ought to be fun playin with my friends rides too. My tires are 225's, not sure of the width but they are pretty big.
I'll keep you posted if I get the g-tech and let u know how my car runs....
thanks again
 
1 - 5 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top