DodgeIntrepid.Net Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
683 Posts
For the 8 bolts on the sides of each head:

1.) 35 ft-lbs
2.) 55 ft-lbs
3.) 55 ft-lbs (recheck I think)
4.) +90 degrees do not use a torque wrench for this step

For the 3 bolts at the front of each head:
1.) 250 in-lbs


Lubricate the threads with clean motor oil before installing.

If reusing the old bolts, check them for necking by using a straight-edge and making sure it touches all of the threads.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
maaaan, i did every possible search to try and find the info, but i didnt try the heading "service manual" thanks a million Ronbo!

95LHS, thank you for the detailed information, not even the dealer would give me the specifics!!
 

·
Registered
Joined
·
1 Posts
For the 8 bolts on the sides of each head:

1.) 35 ft-lbs
2.) 55 ft-lbs
3.) 55 ft-lbs (recheck I think)
4.) +90 degrees do not use a torque wrench for this step

For the 3 bolts at the front of each head:
1.) 250 in-lbs


Lubricate the threads with clean motor oil before installing.

If reusing the old bolts, check them for necking by using a straight-edge and making sure it touches all of the threads.
can you help me to know how to make 250 in-lbs
 

·
Woober Goobers!
Joined
·
50,736 Posts
1 - 6 of 6 Posts
Top