DodgeIntrepid.Net Forums - Dodge Intrepid, Concorde, 300m and Eagle Vision chat banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi i have a 2004 se 2.7 and cylider 6 is not firing gives me a p0356. at first i thought maybe its just a bad coil. so i swap coils with cylinder 4 hoping cylinder 4 wont fire and its just a coil... i was wrong cylinder 6 still not firing... i replace the plug and still no firing. I removed coil (still connected) to see if its getting spark and no spark... im stumped it recently had a computer swap since the computer died on me when i got the replacement it didnt start since they sent me a computer with a skim key. my car did not have a skim key so i sent it back and they gave me one without the skim key and now it starts but cylinder 6 wont start. it ran just fine before it sat for a month.any help???
 

·
Premium Member
Joined
·
16,521 Posts
Sounds like either a bad wire/connection, or the replacement PCM is also bad.
 
1 - 2 of 2 Posts
Top