DodgeIntrepid.Net Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
2,052 Posts
Discussion Starter #1 (Edited)
The Throttle Body that carried the Red Baron to many race wins is now for sale. This Throttle body is bored out to 70MM with the 64MM restriction completely removed. This race unit is available for $250.

Pictures available here

http://300mclub.org/forums/viewtopic.php?t=9959

Let me know.
 

·
Registered
Joined
·
2,627 Posts
hmmm 150 speedo you want 250$ or 250 and the traded speedo i have the 300 m speedo out of a 2000 300m with abs and the 4 spd overdrive
 

·
Registered
Joined
·
2,052 Posts
Discussion Starter #4
$250 PLUS the trade.
 

·
Registered
Joined
·
25 Posts
Arn't the bolts for the TB seized in the bores? Looks like the heads are snapped right off on two of them
 

·
Registered
Joined
·
2,052 Posts
Discussion Starter #7
Nope

Not siezed at all

I used new screws that were low profile torx screws for the throttle plate.

There are no broken pieces on the TB at all.
 

·
Mopar or No Car
Joined
·
7,869 Posts
DScruggs said:
$250 PLUS the trade.
Don, you need a trade-in for the TB? Hmmmm, I hope that plenum I bought last spring has one with it - it seems like it does but I can't remember for sure. If not I'll still make it work for a 70mm! They're not that tough to swap ... :)
 

·
Registered
Joined
·
2,052 Posts
Discussion Starter #9
D76G12 said:
Don, you need a trade-in for the TB? Hmmmm, I hope that plenum I bought last spring has one with it - it seems like it does but I can't remember for sure. If not I'll still make it work for a 70mm! They're not that tough to swap ... :)
No trade needed for the Throttle Body

I have the stock one reinstalled already.
 
1 - 10 of 10 Posts
Top