DodgeIntrepid.Net Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
388 Posts
Discussion Starter · #1 ·
Hello,
I was looking into getting some nice Concorde LX seats (the ones with the crazy 90s patterns on them) and I wanted to ask if the connectors would be the same as they are on my 04. My guess is probably not but I wanted to ask regardless. And if they're not compatible, would it be possible to just swap the cushions instead so I then don't have to try and find some with the same setup as mine (power driver's seat manual passenger seat)?
Thanks for your time!
 

· Registered
2002 Chrysler 300M Special
Joined
·
3,493 Posts
I haven't had any early car seats apart since I only ever hunt for 02-04 Special seats to keep as spares, but the cushions and leanbacks should be swappable. I haven't done a Concorde-to-Intrepid swap, but I have swapped sides on seat cushions many times and took a manual seat rack from an Intrepid once, everything looked similar as far as cushion/leanback hard points.
 

· Registered
Joined
·
388 Posts
Discussion Starter · #3 ·
I haven't had any early car seats apart since I only ever hunt for 02-04 Special seats to keep as spares, but the cushions and leanbacks should be swappable. I haven't done a Concorde-to-Intrepid swap, but I have swapped sides on seat cushions many times and took a manual seat rack from an Intrepid once, everything looked similar as far as cushion/leanback hard points.
Ok. Thanks for the info! I’ll probably end up swapping the cushions over.
 
1 - 3 of 3 Posts
Top