DodgeIntrepid.Net Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
537 Posts
Discussion Starter #1
Okay I was tryin to figure out whats wrong with my brakes. I would slow down and the ABS would kick in....no ABS lites tho?
So I pulled the ABS fuse and everything is fine. Anyways so i decided to take a look at the sensor and they were stuck in...I tried lube and channel locks and wiggled it and a end popped off...but the sensor was still in?
So I put it all back together and put the fuse in and now the lite is on.

Should the whole thing come out of the hub? And anyone have this kinda problem?

Jay
 

·
Registered
Joined
·
2,917 Posts
Yep the old ones are a tough biatch to get out. I broke mine on my 99 too. I tried wiggling and turning and what not until I pulled the assembly right out of the aluminum sleeve... :behead: needless to say I need new sensors, but I haven't bothered going to get them since they're not that cheap either....just pop out the ABS bulb from the cluster... :biggrin:
 
1 - 2 of 2 Posts
Top