DodgeIntrepid.Net Forums banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
19,140 Posts
Hi Vlad!

It would be on the discharge (high pressure) refrigerant line (hose) that connects from the a.c. compressor to the a.c. condenser. (Condenser is mounted between the radiator and the grille.) It should be located next to the passenger side end of the radiator. It is the only part on the refrigerant hoses that has an electrical connector.


Procedure from Chrysler FSM:

A/C PRESSURE TRANSDUCER
Removal & Installation
Disconnect harness connector. Rotate transducer counterclockwise using 3/4" open end wrench. There may be a slight discharge of trapped pressure from fitting. It is not necessary to discharge refrigerant system. To install, reverse removal procedure. Tighten transducer to 50 INCH lbs. (5.6 N.m).


19mm wrench should also work.
 

· Premium Member
Joined
·
19,140 Posts
Glad you got that fixed.

I agree that you've done a remarkable job in restoring it from the condition it was in when you got it!
 
1 - 2 of 2 Posts
Top