DodgeIntrepid.Net Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
413 Posts
Discussion Starter #1
Hello all-I am the proud owner of a 99 Intrepid base model. I have a bad control arm on the passenger side. My local shop wants $225 to replace it :cussing: -I can get the part for $40 on Ebay. I am wondering if this would be a fairly easy DIY project or if I would be better off coming up with the cash-any help is very much appreciated!
 

·
Registered
Joined
·
4,600 Posts
Welcome to the site Will.

I just looked in the 2nd generation service manual which your '99 falls into and I would pony up the dough. It seems like a quite a bit of work.

I would read up on the procedure in the manual,
link here http://dodgeintrepid.net/forums/showthread.php?t=26491
and see what is involved. Some of the parts are not reusable and during the teardown, some parts might get damaged if you are not careful.

Good luck
 
1 - 6 of 6 Posts
Top