DodgeIntrepid.Net Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
11,495 Posts
Discussion Starter · #1 ·
Just a quick question, I know how to get the top cover of the center area around the shifter. Is there a way to remove the side plastic pieces so that I can clean it up a little. It's a little dirty in ther and it's bothering me ;)

I got in there with a vacuum, but couln't get everywhere.

Thanks :)
 

·
Registered
Joined
·
51 Posts
much like everything else in this car, you just grab and pull. i think i put the parking brake on and shifted the car to where the autostick is, then moved the console around so i could see where the pieces were. hmmm but this may have been after i removed the lower part of my dash...i can't quite remember. check the link in my signature, there should be pics.
 

·
Registered
Joined
·
611 Posts
Don't pull too hard... There are three screws holding the left side on. You have to take off the knee bolster, too.
 

·
Registered
Joined
·
611 Posts
There are a bunch of screws inside.
 

·
Registered
Joined
·
1,344 Posts
yeah, thats where i would look, they would have to bolt it down back there somehow.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top